Huawei Surveillance Camera Installation Guide185

Introduction

Welcome to the Huawei Surveillance Camera Installation Guide. This guide will provide you with step-by-step instructions on how to install and configure your Huawei surveillance camera. Please read this guide carefully before beginning the installation process.

Tools and Materials

Before beginning the installation, you will need to gather the following tools and materials:
Huawei surveillance camera
Ethernet cable
Power supply adapter
Drill
Screws
Mounting bracket
Wrench

Step 1: Choose a location for the camera

The first step is to choose a location for your camera. The location should provide a clear view of the area you want to monitor. It is also important to consider the height and angle of the camera. The camera should be mounted at a height that will allow it to capture clear images. The angle of the camera should be adjusted so that it is pointing directly at the area you want to monitor.

Step 2: Mount the camera

Once you have chosen a location for the camera, you need to mount it. The camera can be mounted on a wall or ceiling. To mount the camera on a wall, use the mounting bracket to mark the drill holes. Drill the holes and insert the screws. To mount the camera on a ceiling, use the mounting bracket to mark the drill holes. Drill the holes and insert the bolts. Hang the camera on the bolts.

Step 3: Connect the camera to the power supply

Once the camera is mounted, you need to connect it to the power supply. The power supply adapter is included with the camera. To connect the camera to the power supply, plug the power supply adapter into an electrical outlet. Then, plug the other end of the power supply adapter into the camera.

Step 4: Connect the camera to the network

Once the camera is connected to the power supply, you need to connect it to the network. The camera can be connected to the network using an Ethernet cable. To connect the camera to the network, plug one end of the Ethernet cable into the camera. Then, plug the other end of the Ethernet cable into a network port.

Step 5: Configure the camera

Once the camera is connected to the network, you can configure it. To configure the camera, open a web browser and enter the IP address of the camera. The IP address of the camera can be found on the bottom of the camera. Once you have entered the IP address of the camera, you will be prompted to enter a username and password. The default username and password is "admin".Once you have logged in to the camera, you can configure the camera settings. The camera settings include the video resolution, the frame rate, the exposure, and the white balance. You can also create motion detection zones and set up alarms.

Step 6: Monitor the camera

Once the camera is configured, you can start monitoring it. To monitor the camera, open a web browser and enter the IP address of the camera. You can also use the Huawei Surveillance app to monitor the camera. The Huawei Surveillance app is available for iOS and Android devices.

Troubleshooting

If you are having problems installing or configuring your Huawei surveillance camera, please consult the troubleshooting guide.

2025-01-28

Previous：Mobile Surveillance Software Installation Guide

Next：How to Set Multiplier in Monitoring Devices