How to Set Up Parking Mode on a Dash Cam87

Parking mode is a useful feature that allows your dash cam to continue recording even when your car is parked and turned off. This can be helpful for capturing footage of hit-and-runs, vandalism, or other incidents that may occur while your car is unattended. Most dash cams have a built-in parking mode feature, but you may need to enable it and configure the settings before you can use it.

To set up parking mode on your dash cam, follow these steps:1. Park your car and turn off the engine.
2. Connect your dash cam to a power source. Most dash cams come with a cigarette lighter adapter that you can use to connect the camera to your car's battery.
3. Turn on your dash cam.
4. Navigate to the parking mode settings. The location of these settings may vary depending on your dash cam model. Consult your user manual for specific instructions.
5. Enable parking mode. Once you have found the parking mode settings, enable the feature.
6. Configure the parking mode settings. The following settings are typically available for parking mode:
* Motion detection: This setting allows your dash cam to start recording when it detects motion in front of the camera.
* Impact detection: This setting allows your dash cam to start recording when it detects an impact to your car.
* Time-lapse recording: This setting allows your dash cam to record a series of still images at a set interval. This can help to conserve storage space and battery power.
* Parking mode duration: This setting allows you to set the duration of time that your dash cam will record in parking mode.
7. Test parking mode. Once you have configured the parking mode settings, test the feature to make sure that it is working properly. Park your car in a safe location and turn off the engine. Wait a few minutes for the dash cam to enter parking mode, then trigger the motion or impact detection feature. The dash cam should start recording and save the footage to the memory card.

Here are some additional tips for using parking mode:* Use a high-quality memory card. Parking mode can generate a lot of data, so it is important to use a high-quality memory card that is capable of storing large amounts of video footage.
* Keep your dash cam charged. Parking mode can drain your car's battery, so it is important to keep your dash cam charged. If you are using a cigarette lighter adapter, make sure that the adapter is plugged into a live outlet.
* Park in a safe location. Parking mode is not a substitute for parking in a safe location. If you are concerned about the safety of your car, park in a well-lit area with plenty of foot traffic.

Parking mode is a useful feature that can help you to protect your car and capture footage of incidents that occur while your car is unattended. By following these tips, you can set up and use parking mode on your dash cam to keep your car safe.

2024-11-13

Previous：How to Set Up a Home Security Monitor

Next：Dahua Surveillance Switch Configuration