Dahua Surveillance Switch Configuration379

Introduction
Dahua surveillance switches are robust and feature-rich devices designed for use in surveillance systems. They offer a wide range of options for configuring and managing the network, and this article provides detailed instructions on how to set up and configure a Dahua surveillance switch.
Prerequisites
Before configuring the switch, ensure the following prerequisites are met:
- Physical access to the switch
- Network cable to connect to the switch
- PoE adapter (if using PoE devices)
- IP address (if using IP-based management)
Configuration Steps
1. Power up the switch: Connect the power cable to the switch and turn it on.
2. Establish a connection: There are two methods to establish a connection to the switch:
- Web interface: Open a web browser and enter the IP address of the switch in the address bar.
- Telnet/SSH: Use a Telnet or SSH client and connect to the switch using the default IP address and credentials.
3. Default IP address and credentials: The default IP address for Dahua surveillance switches is 192.168.1.108. The default username and password are both "admin."
4. Configure the IP address: If necessary, change the IP address of the switch by navigating to "Network > IP Settings" in the web interface or using the "set ip" command in Telnet/SSH.
5. Configure VLANs: VLANs (Virtual Local Area Networks) allow you to segment the network and logically isolate devices. To create a VLAN:
- Navigate to "Network > VLAN" in the web interface.
- Click on "Add."
- Enter a VLAN ID and name.
- Select the ports to be assigned to the VLAN.
- Click "Save."
6. Configure PoE: If the switch supports Power over Ethernet (PoE), you can enable PoE for specific ports.
- Navigate to "Power > PoE" in the web interface.
- Select the ports to be enabled for PoE.
- Set the PoE budget (if applicable).
- Click "Save."
7. Configure port settings: Each port can have its settings configured individually.
- Navigate to "Switch > Port Management" in the web interface.
- Select the port you want to configure.
- Configure settings such as speed, duplex, and flow control.
- Click "Save."
8. Configure QoS: Quality of Service (QoS) allows you to prioritize traffic based on specific criteria.
- Navigate to "Switch > QoS" in the web interface.
- Configure QoS settings such as priority, bandwidth limit, and packet size.
- Click "Save."
9. Configure security: Implement the following security measures:
- Change default password: Change the default password for both the web interface and Telnet/SSH access.
- Enable port security: Limit the number of MAC addresses allowed on each port to prevent unauthorized access.
- Enable MAC filtering: Allow or block specific MAC addresses from accessing the switch.
Conclusion
Following these steps, you will successfully set up and configure your Dahua surveillance switch. Remember to save your changes regularly and test the switch to ensure it operates as expected. Regular monitoring and maintenance are essential to maintaining a secure and efficient surveillance network.

2024-11-13

---

Previous：How to Set Up Parking Mode on a Dash Cam

Next：How to Set Up Tracking in Monitoring Devices