How to Connect Your Xiaomi Security Camera to the Internet via Ethernet Cable: A Step-by-Step Guide with Pictures260

This guide provides a comprehensive walkthrough on connecting your Xiaomi security camera to the internet using an Ethernet cable. While most Xiaomi cameras offer Wi-Fi connectivity, a wired connection offers superior stability and bandwidth, crucial for reliable and high-quality video streaming, especially in areas with weak or unreliable Wi-Fi signals. This is particularly beneficial for applications requiring continuous, uninterrupted surveillance.

Before you begin, ensure you have the following:
Your Xiaomi security camera (specific model may affect minor steps, refer to your camera's manual if needed)
An Ethernet cable (a standard Cat5e or Cat6 cable is recommended)
A router with an available Ethernet port
The Xiaomi Home app installed on your smartphone (iOS or Android)
Your Wi-Fi network name (SSID) and password (this is still needed even with an Ethernet connection, depending on the camera model. Many require initial WiFi configuration before wired setup is possible.)

Step 1: Preparing Your Camera and Environment

[Insert Image: A picture showing the Xiaomi camera with its power adapter and Ethernet port clearly visible. Ideally, this would show the camera's location - e.g., mounted on a wall with the Ethernet cable running to the router. A simple diagram could also be effective.]

First, ensure your Xiaomi camera is powered off. Locate the Ethernet port on your camera; it's usually a small rectangular port. This port is often located near the power input, but consult your camera's manual if you cannot locate it easily. Choose a suitable location for your camera, ensuring it has a clear view of the area you want to monitor. Also, consider the cable's length, making sure it's long enough to reach your router. Power on the camera after positioning.

Step 2: Connecting the Ethernet Cable

[Insert Image: A close-up picture showing the Ethernet cable being plugged into both the camera and the router. Clearly label the camera port and router port.]

Carefully connect one end of the Ethernet cable to the Ethernet port on your Xiaomi camera. The other end should be connected to an available Ethernet port on your router. Make sure the connection is secure; a loose connection can interrupt the network signal.

Step 3: Initial Setup and WiFi Connection (If Required)

[Insert Image: Screenshots from the Xiaomi Home app showing the initial setup process. Show the screen where the user needs to enter the Wi-Fi credentials.]

Many Xiaomi cameras require an initial Wi-Fi setup, even if you intend to use an Ethernet cable later. Open the Xiaomi Home app on your smartphone and follow the on-screen instructions to add a new device. You will likely need to scan a QR code located on the camera or manually enter the device's ID. The app will then guide you through connecting the camera to your Wi-Fi network. This process usually involves entering your Wi-Fi SSID and password.

Step 4: Confirming the Wired Connection

[Insert Image: Screenshot from the Xiaomi Home app showing the camera's status, clearly indicating that it's connected via Ethernet. This might show an icon representing the wired connection.]

Once the initial setup (including Wi-Fi connection, if applicable) is complete, check the app to verify that your camera is connected to your network. The app should indicate the camera's connection status; it might show "Wired" or a similar designation. If the connection isn't successful, check the Ethernet cable for proper connection to both the camera and router. Also, make sure the Ethernet port on your router is functioning correctly.

Step 5: Testing the Camera

[Insert Image: A screenshot of the live video feed from the camera displayed in the Xiaomi Home app.]

After confirming the wired connection, test the camera's functionality by viewing the live video feed in the Xiaomi Home app. Observe the video quality and check for any latency or interruptions. If the video quality is significantly better than when using Wi-Fi, then the Ethernet connection is working correctly.

Troubleshooting Tips:
No internet connection: Double-check the Ethernet cable connections at both ends. Ensure that the router's Ethernet port is working. Restart both the camera and your router.
Poor video quality: Verify that the Ethernet cable is of sufficient quality (Cat5e or Cat6 recommended). Check for network congestion on your router.
Intermittent connection: A faulty Ethernet cable could be the culprit. Try replacing the cable with a new one.
Camera not detected: Ensure your smartphone is connected to the same Wi-Fi network as your router. Restart the Xiaomi Home app and try again.

By following these steps and troubleshooting tips, you can successfully connect your Xiaomi security camera to the internet using an Ethernet cable for a more stable and reliable surveillance system. Remember to consult your camera’s specific user manual for any model-specific instructions.

2025-08-21

Next：How to Adjust the Viewing Area and Resolution of Your Ezviz Security Cameras