Switch Port Bridging Tutorial on Monitored Devices32

Introduction

Port bridging is a networking technique that allows multiple network segments to communicate with each other as if they were on the same network. This can be useful for connecting different types of devices, such as computers, printers, and servers, to each other without having to use a router. In this tutorial, we will show you how to set up port bridging on a monitored switch.

Requirements

To set up port bridging, you will need the following:* A monitored switch
Two or more network devices
Ethernet cables

Instructions

To set up port bridging, follow these steps:Connect the network devices to the switch. Use Ethernet cables to connect the network devices to the switch.
Configure the switch ports. On the switch, configure the ports that you want to bridge as trunk ports. Trunk ports are ports that can carry multiple VLANs. To configure a port as a trunk port, use the following command:

switchport trunk allowed vlan add
Create a bridge. On the switch, create a bridge to connect the trunk ports. To create a bridge, use the following command:

spanning-tree vlan bridge-group
Add the trunk ports to the bridge. On the switch, add the trunk ports to the bridge. To add a trunk port to a bridge, use the following command:

spanning-tree vlan bridge-group add port
Verify the bridge configuration. On the switch, verify the bridge configuration. To verify the bridge configuration, use the following command:

show spanning-tree vlan bridge-group

Troubleshooting

If you are having problems setting up port bridging, try the following:* Make sure that the network devices are connected to the switch correctly.
Make sure that the switch ports are configured correctly as trunk ports.
Make sure that the bridge is created correctly.
Make sure that the trunk ports are added to the bridge correctly.

Conclusion

Port bridging is a useful networking technique that can be used to connect different types of devices to each other. By following the steps in this tutorial, you can set up port bridging on a monitored switch.

2024-11-06

Previous：How to Extend the Range of Wireless Security Cameras

Next：How to Set Up Surveillance Equipment Without Leading to Trajectory Tracking