Midiview Security Camera Installation Guide374

Introduction

Thank you for choosing Midiview security cameras. This installation guide will provide step-by-step instructions on how to install your cameras and connect them to your monitoring system. Please read the instructions carefully before beginning the installation process.

Tools and Materials Required
Midiview security camera
Mounting bracket
Screws
Drill
Wrench
Ethernet cable (if connecting to a network)
Power adapter

Camera Placement

Before installing the cameras, it is important to determine the best locations for them. Consider the following factors when choosing camera placement:
Coverage area: Ensure that the cameras cover all areas that need to be monitored.
Field of view: Choose cameras with a field of view that is wide enough to capture the desired area.
Lighting: Avoid placing cameras in areas with excessive glare or shadows.
Obstructions: Ensure that there are no obstructions such as trees or buildings that will block the camera's view.

Mounting the Cameras

Once you have determined the best locations for the cameras, follow these steps to mount them:
Drill pilot holes for the mounting screws.
Attach the mounting bracket to the wall or ceiling using the screws.
Attach the camera to the mounting bracket.
Tighten the screws to secure the camera.

Connecting the Cameras

There are two ways to connect Midiview security cameras: wired and wireless. If you are connecting the cameras to a network, you will need to use an Ethernet cable. If you are not connecting the cameras to a network, you can use a power adapter to power the cameras.

Wired Connection
Connect one end of an Ethernet cable to the camera.
Connect the other end of the Ethernet cable to a PoE injector.
Connect the PoE injector to a network switch.

Wireless Connection
Turn on the camera.
Connect to the camera's Wi-Fi network using your smartphone or computer.
Open a web browser and enter the camera's IP address in the address bar.
Log in to the camera's web interface.
Follow the on-screen instructions to configure the camera's wireless network settings.

Powering the Cameras

If you are not connecting the cameras to a network, you will need to use a power adapter to power the cameras. To do this, follow these steps:
Connect the power adapter to the camera.
Plug the power adapter into an electrical outlet.

Testing the Cameras

Once the cameras are installed and connected, it is important to test them to ensure that they are working properly. To do this, follow these steps:
Open the monitoring software on your computer.
Add the cameras to the software.
View the live video from the cameras.
Make sure that the video is clear and that there are no obstructions.

Troubleshooting

If you are having problems installing or connecting your Midiview security cameras, please refer to the troubleshooting guide below:
The camera is not turning on: Check the power connection and make sure that the camera is plugged in properly.
The camera is not connecting to the network: Check the Ethernet cable connection and make sure that the network switch is turned on.
The video from the camera is blurry: Check the focus of the camera and make sure that there are no obstructions blocking the view.
The camera is not recording: Check the recording settings in the monitoring software and make sure that the camera is set to record.

Conclusion

Congratulations on successfully installing your Midiview security cameras. With proper installation and maintenance, these cameras will provide you with years of reliable security.

2024-11-05

Previous：KTC Monitor Installation Video Tutorial

Next：How to Remove Super Number Setup in Surveillance Equipment