BMW Tire Pressure Monitoring System (TPMS) Reset Instructions204

Is your BMW TPMS light on? Don't worry, resetting it is a simple process that can be done in just a few minutes. Here are the step-by-step instructions on how to reset your BMW TPMS:

Step 1: Gather Your Supplies

You will need the following items to reset your BMW TPMS:* A tire pressure gauge
* A small screwdriver or hex key
* A piece of chalk or a marker

Step 2: Check Your Tire Pressure

Before you reset your TPMS, you need to make sure that your tire pressure is correct. Use the tire pressure gauge to check the pressure of all four tires. The correct tire pressure can be found on the inside of the driver's door jamb.

Step 3: Locate the TPMS Reset Button

The TPMS reset button is located in the glove box. Open the glove box and look for a small button with the symbol of a tire on it. The button may be covered by a small plastic flap.

Step 4: Press and Hold the TPMS Reset Button

Press and hold the TPMS reset button for about five seconds. You will hear a beep and the TPMS light will start to flash. Continue to hold the button until the TPMS light goes out.

Step 5: Drive Your BMW

After you have reset the TPMS, you need to drive your BMW for about 10 minutes. This will allow the system to relearn the correct tire pressure.

Step 6: Check the TPMS Light

After you have driven your BMW for 10 minutes, check the TPMS light. The light should be off. If the light is still on, there may be a problem with your TPMS system. You should take your BMW to a mechanic to have the system checked.

Tips for Resetting Your BMW TPMS

Here are a few tips for resetting your BMW TPMS:* Make sure that the tires are inflated to the correct pressure.
* Press and hold the TPMS reset button for the full five seconds.
* Drive your BMW for at least 10 minutes after resetting the TPMS.
* If the TPMS light is still on after you have driven your BMW for 10 minutes, take the car to a mechanic to have the system checked.

Troubleshooting

If you are having trouble resetting your BMW TPMS, here are a few things you can try:* Make sure that you are pressing the correct button. The TPMS reset button is located in the glove box and has the symbol of a tire on it.
* Make sure that you are holding the button for the full five seconds.
* Drive your BMW for at least 10 minutes after resetting the TPMS.
* If the TPMS light is still on after you have driven your BMW for 10 minutes, take the car to a mechanic to have the system checked.

2024-11-04

Previous：How to Set Version Display on Monitoring Equipment

Next：Intelligent Surveillance Network Video Tutorial