How to Set Time on Dahua Surveillance Cameras266

Setting the correct time on your Dahua surveillance cameras is crucial for proper recording and playback of footage. Accurate timestamps ensure that you can easily locate and review specific events, especially if your cameras are used for security purposes.

Method 1: Set Time via Web Interface

Step 1: Access the camera's web interface by entering its IP address into a web browser.
Step 2: Enter the camera's username and password to log in.
Step 3: Navigate to the "Configuration" or "Settings" tab.
Step 4: Look for the "Time" or "Date and Time" section.
Step 5: Set the time zone, date, and time manually. Ensure that the time displayed matches your local time.

Method 2: Set Time via NVR or NVS

Step 1: Connect the camera to a Dahua NVR (Network Video Recorder) or NVS (Network Video Server).
Step 2: Log in to the NVR/NVS web interface.
Step 3: Select the camera you want to configure from the device list.
Step 4: Navigate to the "Configuration" or "Settings" page for the selected camera.
Step 5: Locate the "Time" or "Date and Time" section and adjust the settings accordingly.

Method 3: Use NTP (Network Time Protocol)

Step 1: In the web interface or NVR/NVS configuration, look for the "NTP" or "Network Time Protocol" section.
Step 2: Enable the NTP service by checking the relevant box.
Step 3: Specify an NTP server address. This can be a public NTP server provided by your ISP or a local time server within your network.
Step 4: Save the changes and reboot the camera or NVR/NVS.

Additional Tips

- Use a reliable NTP server to ensure accurate time synchronization.
- Consider using a GPS module to get the most precise time information.
- Check the camera's firmware for any updates that may affect timekeeping.
- If you encounter any issues setting the time, consult Dahua's technical support for assistance.

Troubleshooting

- If the time is not updating correctly after setting it, check the NTP server settings and ensure that the address is valid.
- Reset the camera to factory settings and reconfigure the time if necessary.
- Contact Dahua technical support if the problem persists.

2024-11-04

Previous：How to Watch Security Camera Footage

Next：Network Monitoring Device Installation Guide