How to Set Up DaHua Surveillance System at Boot156

DaHua surveillance systems are widely used for security monitoring in various applications. To ensure the system operates reliably, it is important to configure the system to start up automatically when power is applied. This guide provides step-by-step instructions on how to set up DaHua surveillance equipment to power on automatically.

Enable Auto Power On

1. Access the NVR Web Interface: Open a web browser and enter the IP address of the NVR into the address bar. Enter the default username and password to log in (usually "admin" and "12345").
2. Go to System Settings: Navigate to "System Settings" > "General" > "Startup".
3. Enable Auto Power On: Tick the checkbox next to "Enable Auto Power On".
4. Set Power On Time: Select the time at which the NVR should automatically power on.
5. Click "Apply": Save the changes by clicking the "Apply" button.

Configure BIOS Settings

1. Restart the NVR: Reboot the NVR by clicking the "Restart" button in the web interface or by power cycling the device.
2. Enter BIOS Settings: During the boot process, press the designated key (usually F2 or Del) to enter the BIOS settings.
3. Find the Power Management Tab: Navigate to the tab or section related to power management.
4. Enable Auto Power On: Locate the setting for "Auto Power On" and set it to "Enabled".
5. Set Power On Time: In some BIOS versions, you can also set the specific time for the NVR to power on.
6. Exit BIOS Settings: Save the changes and exit the BIOS settings by following the on-screen instructions.

Additional Tips

* Set a Wake-Up Time: If the NVR is connected to a UPS or other power source with remote wake-up capabilities, you can configure the NVR to power on when the power source is restored.
* Use a Remote Power Switch: Consider using a remote power switch to remotely power on the NVR if it is located in a hard-to-reach area.
* Battery Backup: Ensure that the NVR has a sufficient battery backup system to maintain operation during power outages.

Conclusion

By following the steps outlined in this guide, you can configure your DaHua surveillance system to automatically power on at a specific time or when power is restored. This ensures that the system remains operational and provides uninterrupted monitoring, enhancing security and protecting your assets.

2024-10-31

Previous：How to Set Up Rapid Coverage with Surveillance Equipment

Next：TV Surveillance Installation Guide: Step-by-Step Instructions