Xiaomi Surveillance Wall Mount Installation Guide90

Installing your Xiaomi surveillance camera on a wall is a simple and straightforward process that can be completed in just a few minutes. By following these step-by-step instructions, you can ensure that your camera is securely mounted and providing you with optimal surveillance coverage.

Materials Required

Before you begin, gather the following materials:* Xiaomi surveillance camera
* Wall mount bracket
* Screws
* Drill
* Screwdriver

Step 1: Choose a Suitable Mounting Location

Select a mounting location that provides a clear view of the area you wish to monitor. The camera should be high enough to avoid tampering but low enough to capture necessary details. Consider factors such as lighting conditions and potential obstructions.

Step 2: Mark the Screw Holes

Place the wall mount bracket against the wall at the chosen location and mark the positions of the screw holes using a pencil or marker.

Step 3: Drill Pilot Holes

Using a drill, create pilot holes at the marked positions. The size of the drill bit should be slightly smaller than the diameter of the screws.

Step 4: Mount the Bracket

Position the wall mount bracket over the pilot holes and insert the screws. Tighten the screws securely using a screwdriver.

Step 5: Attach the Camera to the Bracket

Align the base of the surveillance camera with the corresponding slots on the wall mount bracket. Push the camera into place until it clicks and locks securely.

Step 6: Adjust the Camera Angle

Loosen the adjustment screw on the wall mount bracket to adjust the camera angle. Tilt, pan, and rotate the camera as necessary to achieve the desired view.

Step 7: Tighten the Adjustment Screw

Once the camera is positioned correctly, tighten the adjustment screw to secure it in place.

Tips for Optimal Performance

For optimal surveillance performance, consider the following tips:* Position the camera to avoid direct sunlight or glare.
* Mount the camera at a height that allows for a clear view of the desired area.
* Ensure there are no obstructions blocking the camera's view.
* Regularly clean the camera lens to maintain clear video quality.
* Check the camera's settings to adjust motion detection sensitivity and other parameters as needed.

Troubleshooting

If you encounter any issues during the installation process, refer to the following troubleshooting steps:* If the camera does not lock into place on the bracket, ensure it is correctly aligned and try again.
* If the camera angle cannot be adjusted, check if the adjustment screw is loose and tighten it accordingly.
* If the camera is not providing clear video footage, check the lens for dirt or obstructions and clean it if necessary.
* If you have any further difficulties, refer to the user manual or contact Xiaomi support for assistance.

2025-02-22

Previous：Xiaomi Mi Home Security Camera Connection Guide

Next：Ultimate Guide to Installing a Front-End Surveillance System