Configure Network Settings for Ajhua Monitoring Equipment59

Ajhua monitoring devices are designed to provide comprehensive monitoring solutions for various applications, ranging from network and server performance to environmental conditions. To ensure optimal performance and accurate monitoring data, it is crucial to configure the network settings of your Ajhua monitoring equipment correctly. This guide will provide step-by-step instructions on configuring network settings for Ajhua monitoring devices.

1. Accessing the Web Interface

Begin by connecting your Ajhua monitoring device to a network using an Ethernet cable. Power on the device and wait a few minutes for it to boot up. Next, open a web browser on a computer connected to the same network. Enter the IP address of your Ajhua monitoring device into the browser's address bar. The default IP address is usually 192.168.1.100.

2. Configuring Ethernet Settings

Once you have accessed the web interface, navigate to the "Network" tab. Under the "Ethernet" section, you can configure the following settings:* IP Address: Enter the IP address you want to assign to your Ajhua monitoring device. Ensure that the IP address is within the same subnet as the other devices on your network.
* Subnet Mask: Specify the subnet mask for your network. The subnet mask determines which portion of the IP address is used for network identification and which portion is used for host identification.
* Default Gateway: Enter the IP address of your default gateway, which is typically the IP address of your router.

3. Configuring Wi-Fi Settings

If your Ajhua monitoring device supports Wi-Fi connectivity, you can configure it under the "Wi-Fi" tab. Here, you can:* Select Wi-Fi Network: Choose the Wi-Fi network you want your device to connect to.
* Enter Password: Enter the password for the selected Wi-Fi network.
* Security Type: Select the security type used by the Wi-Fi network, such as WPA2-PSK or WPA3-PSK.

4. Setting DNS Servers

To ensure that your Ajhua monitoring device can resolve domain names to IP addresses, you need to configure DNS servers. Navigate to the "DNS" tab and enter the IP addresses of the DNS servers you want to use.

5. Saving and Applying Changes

Once you have configured the network settings, click on the "Save" button at the bottom of the page. Your changes will be saved, and the Ajhua monitoring device will restart to apply the new settings.

Conclusion

Configuring the network settings for your Ajhua monitoring equipment is essential for ensuring reliable and accurate monitoring. By following the instructions provided in this guide, you can set up your device to seamlessly integrate into your network and provide you with valuable data for monitoring your critical systems.

2025-02-20

Previous：VW Passat Blind Spot Monitoring Tutorial

Next：Mobile Wireless Surveillance Guide: Download and Set Up