360 Monitoring Network Setup: A Comprehensive Guide196

Introduction

360 Monitoring Network Setup: A Comprehensive Guide
360 Monitoring is a comprehensive network monitoring solution that provides real-time visibility and insight into your IT infrastructure. It is designed to help you identify and resolve network issues quickly and efficiently, ensuring optimal performance and availability of your critical business applications.

Prerequisites

Before setting up 360 Monitoring, you will need the following:
A 360 Monitoring account
A network monitoring agent installed on each device you want to monitor
A network management console

Installing the Monitoring Agent

The monitoring agent is a software application that collects data from your devices and sends it to the 360 Monitoring server. You can download the agent from the 360 Monitoring website.

To install the agent:
Log in to the 360 Monitoring server.
Click the "Agents" tab.
Click the "Add Agent" button.
Select the operating system for the device you want to monitor.
Click the "Download" button.
Run the downloaded file on the device you want to monitor.
Follow the on-screen instructions to complete the installation.

Configuring the Monitoring Agent

After the monitoring agent is installed, you need to configure it to collect the data you want. You can do this by editing the agent configuration file.

The agent configuration file is located in the following location:```
/etc/360monitoring/
```

To edit the agent configuration file:
Open the agent configuration file in a text editor.
Add or modify the following settings:
```
# The host where the 360 Monitoring agent sends its check results.
report_to_host = hostname-or-ip-of-360monitoring-server
# The port where the 360 Monitoring agent sends its check results.
report_to_port =
# Interval between two checks in seconds.
check_interval =
```
Save the changes to the agent configuration file.
Restart the monitoring agent.

Adding Devices to the Network Management Console

Once the monitoring agent is installed and configured, you need to add the devices you want to monitor to the network management console.

To add a device to the network management console:
Log in to the network management console.
Click the "Devices" tab.
Click the "Add Device" button.
Enter the hostname or IP address of the device you want to add.
Select the monitoring agent that is installed on the device.
Click the "Add" button.

Creating Monitors

Monitors are used to define the specific metrics that you want to monitor for each device. You can create monitors for a variety of different metrics, such as CPU utilization, memory usage, disk space, and network traffic.

To create a monitor:
Log in to the network management console.
Click the "Monitors" tab.
Click the "Add Monitor" button.
Select the device you want to monitor.
Select the metric you want to monitor.
Configure the monitor settings.
Click the "Create" button.

Viewing Monitor Results

Once you have created monitors, you can view the results in the network management console.

To view monitor results:
Log in to the network management console.
Click the "Monitors" tab.
Select the monitor you want to view.
Click the "View Results" button.

Conclusion

360 Monitoring is a powerful network monitoring solution that can help you identify and resolve network issues quickly and efficiently. By following the steps outlined in this guide, you can set up 360 Monitoring and start monitoring your network in no time.

2025-02-19

Previous：How to Set Up a Dahua Surveillance Gateway

Next：How to Monitor a Phone Camera: A Step-by-Step Guide with Illustrations