Nissan Parking Surveillance Line Installation Guide183

Introduction

Installing a parking surveillance line on your Nissan vehicle can significantly enhance your safety and convenience while reversing or parking in tight spaces. This guide will provide detailed instructions on how to install a parking surveillance line on your Nissan. Please note that the specific tools and materials required may vary depending on the model and year of your vehicle.

Materials Required:
Parking surveillance line kit (camera, monitor, cables, brackets)
Phillips head screwdriver
Trim removal tool (optional)
Electrical tape

Steps:

1. Remove the Rear Bumper Cover:

- Open the trunk and remove the trunk liner.

- Locate the bolts or screws securing the rear bumper cover and remove them.

- Carefully detach the bumper cover from the vehicle and set it aside in a safe location.

2. Mount the Camera:

- Determine the optimal position for the camera, typically near the license plate or above the exhaust pipe.

- Drill or cut a hole in the bumper cover for the camera wire.

- Secure the camera in place using the included brackets and screws.

3. Route the Camera Wire:

- Route the camera wire through the hole in the bumper cover and into the trunk.

- Secure the wire with electrical tape or wire ties to ensure it is protected and out of the way.

4. Connect the Video Cable:

- Connect the video cable from the camera to the monitor or head unit, typically located on the dashboard.

- Ensure the connection is secure and the cable is properly routed.

5. Mount the Monitor:

- Determine the best location for the monitor, such as on the dashboard or overhead console.

- Install the monitor using the included mounting bracket or adhesive.

6. Connect the Power Supply:

- Connect the power wire from the camera to the vehicle's reverse light circuit.

- When the vehicle is in reverse, the camera should activate automatically.

7. Adjust the Parking Lines:

- Once the system is installed, start the vehicle and put it in reverse.

- Adjust the parking lines displayed on the monitor using the controls provided on the camera or monitor.

8. Test the System:

- Test the parking surveillance line system by reversing the vehicle in a safe area.

- Ensure that the camera is providing a clear view and that the parking lines are accurate.

9. Reinstall the Bumper Cover:

- Once the system is tested and working properly, carefully align the bumper cover and reattach it to the vehicle.

- Secure the bumper cover using the bolts or screws removed earlier.

10. Clean Up:

- Clean up any remaining wires, tools, or debris from the installation process.

Congratulations:

You have successfully installed a parking surveillance line on your Nissan vehicle. This system will provide you with added safety and convenience when reversing and parking.

2024-10-29

Previous：Setting Up a Surveillance Network: The Ultimate Step-by-Step Guide

Next：Tutorial: How to Monitor a Washcloth Using Surveillance Equipment