Audi Monitoring System Installation Video Tutorial43

Introduction

This video tutorial will provide you with step-by-step instructions on how to install the Audi Monitoring System (AMS) in your vehicle. The AMS is a comprehensive security system that offers a variety of features to protect your vehicle and its contents. These features include:
Remote vehicle monitoring
Theft alerts
Impact alerts
Geo-fencing
Speed limit alerts
Curfew alerts

The AMS is a valuable addition to any vehicle, and this video tutorial will show you how to install it quickly and easily.

Materials Required

Before you begin the installation, you will need to gather the following materials:
Audi Monitoring System (AMS)
Installation guide
Phillips screwdriver
Wire strippers
Electrical tape

Installation Instructions

Once you have gathered the necessary materials, you can begin the installation process. Follow these steps carefully:
Prepare the vehicle. Park the vehicle in a safe and well-lit area. Turn off the engine and remove the keys from the ignition.
Locate the installation points. The AMS will be installed in the following locations:

Control unit: Under the dashboard, behind the glove box
GPS antenna: On the windshield, behind the rearview mirror
GSM antenna: On the trunk lid, under the spoiler
Impact sensor: On the frame of the vehicle, under the front bumper
Battery backup: In the trunk, next to the battery

Install the control unit. Use the Phillips screwdriver to remove the glove box. Locate the space behind the glove box and insert the control unit. Secure the control unit with the screws provided.
Install the GPS antenna. Peel off the backing of the GPS antenna and stick it to the windshield, behind the rearview mirror. Make sure the antenna is facing up towards the sky.
Install the GSM antenna. Peel off the backing of the GSM antenna and stick it to the trunk lid, under the spoiler. Make sure the antenna is facing up towards the sky.
Install the impact sensor. Locate the frame of the vehicle, under the front bumper. Use the Phillips screwdriver to remove the screws holding the plastic cover in place. Insert the impact sensor into the opening and secure it with the screws provided.
Install the battery backup. Open the trunk and locate the battery. Peel off the backing of the battery backup and stick it to the trunk, next to the battery. Make sure the battery backup is facing down towards the ground.
Connect the wires. Connect the wires from the control unit to the GPS antenna, GSM antenna, impact sensor, and battery backup. Use the wire strippers to strip the ends of the wires and then connect them to the terminals on the control unit. Secure the connections with electrical tape.
Test the system. Once the system is installed, you can test it by activating the remote monitoring feature. Use the Audi MMI system to activate the feature and then use the Audi Connect app to monitor your vehicle.

Conclusion

Congratulations, you have now successfully installed the Audi Monitoring System in your vehicle. This system will provide you with peace of mind, knowing that your vehicle is protected from theft and other threats.

2024-10-29

Previous：[Updated 2023] How to Set Up a Wireless Vehicle Surveillance System for Enhanced Security

Next：Installation Guide for Security Cameras