How to Set Up Lehua Surveillance169

1. Introduction

Lehua surveillance cameras are a popular choice for home and business security. They are affordable, easy to install, and offer a variety of features to meet your needs. In this article, we will show you how to set up a Lehua surveillance camera.

2. What you need

Before you begin, you will need the following items:* Lehua surveillance camera
* Power adapter
* Ethernet cable (optional)
* Screwdriver
* Drill (optional)
* Screws (optional)

3. Installation

There are two ways to install a Lehua surveillance camera: wired and wireless. Wired installation is more secure, but wireless installation is more convenient. Here are the steps for both methods:

3.1 Wired Installation

1. Choose a location for the camera. It should be high enough to avoid being tampered with, but low enough to get a clear view of the area you want to monitor.
2. Drill a hole for the Ethernet cable. If you are using a wireless camera, you can skip this step.
3. Run the Ethernet cable through the hole.
4. Connect the Ethernet cable to the camera.
5. Connect the power adapter to the camera.
6. Turn on the power.

3.2 Wireless Installation

1. Choose a location for the camera. It should be within range of your Wi-Fi network.
2. Turn on the camera.
3. Open the Lehua app on your phone or computer.
4. Follow the instructions in the app to connect the camera to your Wi-Fi network.

4. Configuration

Once the camera is installed, you need to configure it. Here are the steps:1. Open the Lehua app on your phone or computer.
2. Select the camera you want to configure.
3. Tap the "Settings" icon.
4. Configure the following settings:
* Name: The name of the camera.
* Resolution: The resolution of the video.
* Frame rate: The number of frames per second.
* Bitrate: The amount of data used per second.
* Motion detection: The sensitivity of the motion detection.
* Notifications: The type of notifications you want to receive.
5. Tap "Save".

5. Viewing and recording

Once the camera is configured, you can start viewing and recording video. Here are the steps:1. Open the Lehua app on your phone or computer.
2. Select the camera you want to view.
3. Tap the "Play" button.
4. To record video, tap the "Record" button.

6. Troubleshooting

If you are having problems setting up or using your Lehua surveillance camera, here are some troubleshooting tips:* Make sure the camera is turned on.
* Check the connections between the camera, the power adapter, and the Ethernet cable (if you are using a wired connection).
* Make sure the camera is within range of your Wi-Fi network (if you are using a wireless connection).
* Reset the camera to factory defaults.
* Contact Lehua customer support.

2025-02-07

Previous：How to Set Frame Rate in Dahua Surveillance Systems

Next：How to Set Up a Surveillance System in a Rural County