How to Configure Dahua Surveillance Camera for Remote Access210

Introduction

Dahua surveillance cameras offer advanced security and monitoring solutions for homes, businesses, and organizations. To enhance the functionality of these cameras and enable remote access, it is crucial to configure them correctly for internet connectivity. In this article, we will provide a comprehensive guide to Dahua surveillance camera internet setup.

Prerequisites

Before you begin, ensure you have the following:
Dahua surveillance camera
Ethernet cable
Network Video Recorder (NVR) (optional)
Internet connection

Step 1: Connect the Camera to the Network

1. Connect one end of the Ethernet cable to the camera's Ethernet port and the other end to a router or switch.

2. Power on the camera and allow it to boot up.

Step 2: Assign an IP Address to the Camera

There are two methods to assign an IP address to the camera:
DHCP: If your network uses DHCP, the camera will automatically obtain an IP address from the DHCP server.
Static IP: If you prefer a static IP address, you can manually configure it through the camera's web interface.

Step 3: Access the Camera's Web Interface

1. Open a web browser and enter the IP address of the camera in the address bar.

2. Enter the camera's default username and password (usually "admin").

Step 4: Configure Port Forwarding

Port forwarding allows remote access to the camera by forwarding specific ports from your router to the camera's IP address. The port used for Dahua cameras is typically 8000.

1. Log in to your router's web interface.

2. Navigate to the "Port Forwarding" or "Virtual Server" section.

3. Create a new port forwarding rule with the following settings:
External Port: 8000
Internal Port: 8000
Internal IP Address: Camera's IP address
Protocol: TCP or Both

Step 5: Configure DDNS (Optional)

DDNS (Dynamic Domain Name Service) allows you to access the camera using a domain name instead of the IP address, which can change over time.

1. Register for a free DDNS account with a provider like or .

2. Create a new hostname record and enter the camera's external IP address.

3. Configure the camera's DDNS settings using the hostname and credentials.

Step 6: Remote Access to the Camera

To access the camera remotely, you can use one of the following methods:
Web Browser: Enter the camera's hostname or IP address followed by the port number (e.g., :8000).
Mobile App: Download the Dahua surveillance app (e.g., iDMSS, gDMSS) and log in using the camera's username and password.
Software: Use software such as SmartPSS to manage and access multiple Dahua cameras.

Conclusion

Configuring Dahua surveillance cameras for internet setup enables remote access and enhanced security. By following the steps outlined in this article, you can ensure that your camera is securely connected and accessible from anywhere. If you encounter any difficulties, refer to the camera's user manual or contact technical support for assistance.

2025-02-05

Previous：Wired Security Camera Installation: A Comprehensive Guide

Next：How to Write a Security Camera Buying Guide