How to Install and Remove the Honor Monitor395

Materials Required:
Honor Monitor
Monitor Stand (included)
Phillips screwdriver

Installation Instructions

Step 1: Attach the Monitor Stand
Place the monitor face down on a soft surface to avoid scratches.
Align the notch on the monitor with the corresponding tab on the monitor stand.
Gently push the stand into place until it clicks into the notch.
Use the provided screws to secure the stand to the monitor.

Step 2: Mount the Monitor
Determine the desired height and angle for your monitor.
Loosen the tilt and height adjustment knobs on the back of the stand.
Adjust the monitor to your preferred position.
Tighten the knobs to secure the monitor in place.

Step 3: Connect the Cables
Connect the power cable to the monitor and a power outlet.
Connect the desired video and audio cables to the monitor and your computer.

Step 4: Power On and Configure
Press the power button on the monitor to turn it on.
Configure the monitor settings using the onscreen display (OSD) menu.

Removal Instructions

Step 1: Disconnect the Cables
Disconnect the power cable, video cable, and any other connected cables from the monitor.

Step 2: Remove the Stand
Loosen the screws that secure the monitor stand to the monitor.
Gently lift the stand away from the monitor.

Step 3: Pack the Monitor
Wrap the monitor in the original packaging or a protective covering.
Place the monitor in the packaging with the screen facing up.

Additional Tips* Handle the monitor with care to avoid damage.
* Use a soft cloth to clean the monitor screen.
* If you experience any issues during installation or removal, refer to the user manual or contact customer support.
* Dispose of the packaging responsibly.

2025-01-28

Previous：Monitor Anywhere with Your Smartphone

Next：Monitoring Privacy Settings: A Comprehensive Guide to Protect Your Security