How to Reboot a Security Camera or NVR283

Step 1: Power Cycle the Device

The simplest way to reboot a security camera or NVR is to power cycle it. This will completely restart the device and clear any temporary errors or glitches that may be causing issues.

To power cycle a security camera or NVR, follow these steps:
Unplug the device from the power outlet.
Wait for 30 seconds.
Plug the device back into the power outlet.

The device will automatically restart.

Step 2: Use the Reset Button

If power cycling the device does not work, you can try using the reset button. The reset button is usually located on the back or bottom of the device. It is a small, recessed button that must be pressed with a paperclip or other sharp object.

To reset a security camera or NVR, follow these steps:
Press and hold the reset button for 10 seconds.
Release the button.
The device will automatically restart.

Step 3: Use the Web Interface

Many security cameras and NVRs have a web interface that can be used to manage the device. The web interface can be used to reboot the device, as well as perform other administrative tasks.

To reboot a security camera or NVR using the web interface, follow these steps:
Open a web browser and enter the IP address of the device.
Enter the username and password for the device.
Click on the "System" tab.
Click on the "Reboot" button.
The device will automatically restart.

Step 4: Contact Customer Support

If you are unable to reboot the security camera or NVR using the above steps, you may need to contact customer support. Customer support can help you troubleshoot the issue and get the device up and running again.

2025-01-27

Previous：How to Set Up Monitoring Categories

Next：BIOS Settings for Monitoring Devices