Dahua Surveillance System Network Configuration335

Introduction
Dahua surveillance systems offer advanced security solutions for various applications. Connecting these systems to a network is crucial for remote monitoring, centralized management, and accessing footage from anywhere. This comprehensive guide will provide step-by-step instructions on how to set up network connectivity for Dahua surveillance systems.
Network Requirements
Before configuring the network, ensure that you have the following:
* A working network with an active internet connection
* An IP address for the surveillance device
* A network cable (Ethernet or PoE)
* A router or switch connected to the network
IP Address Configuration
The first step is to assign an IP address to the surveillance device.
* Log into the device's web interface using the default IP address (usually 192.168.1.108).
* Go to the Network section and select "Basic Configuration."
* Set the IP address, Subnet Mask, and Gateway according to your network settings.
* Save the changes.
Port Configuration
Next, you need to configure the ports used for network communication:
* In the Network section, select "Advanced Configuration."
* Under "TCP/IP Settings," set the HTTP port (usually 80) and the RTSP port (usually 554).
* These ports allow access to the web interface and streaming video, respectively.
* Save the changes.
DNS Configuration
DNS (Domain Name System) is used to translate website domain names into IP addresses.
* Under "TCP/IP Settings," set the Preferred DNS Server and Alternate DNS Server.
* These addresses are usually provided by your ISP.
* Save the changes.
DHCP Configuration
If you have a DHCP server on your network, you can skip the manual IP configuration and use DHCP to assign IP addresses:
* Under "TCP/IP Settings," enable "Obtain IP Address Automatically."
* Save the changes.
Network Validation
After configuring the network settings, test if the connection is successful:
* Ping the surveillance device's IP address from your computer.
* If you get a response, the network connection is established.
* Access the web interface using the new IP address to verify that it is working correctly.
Remote Access Setup
To access the surveillance system remotely, you need to configure the router or firewall:
* Log into your router's web interface.
* Find the Port Forwarding section and create a new entry.
* Set the Protocol to TCP/UDP, the External Port to the HTTP port of the surveillance device, and the Internal Port to the HTTP port on the router.
* Repeat the process for the RTSP port.
* Save the changes.
Mobile App Configuration
If you want to access the surveillance system on your mobile device, you can use the Dahua mobile app:
* Download and install the "DMSS" app on your phone.
* Create an account and log in.
* Add the surveillance device by scanning the QR code on the device or manually entering the IP address and port number.
* You can now view live footage, playback recordings, and control the cameras remotely.
Conclusion
Configuring network connectivity for Dahua surveillance systems is a straightforward process that allows remote access and centralized management. By following these steps, you can ensure that your surveillance system is connected to the network and accessible from anywhere with an internet connection.

2025-01-03

---

Previous：Skill Monitoring Plugin Configuration

Next：Synchronizing Monitoring Deployment