How to Set Up BYD Blind Spot Monitoring337

Blind spot monitoring (BSM) is a safety feature that helps drivers to avoid accidents by alerting them to vehicles in their blind spots. The BYD Blind Spot Monitoring system uses radar sensors to detect vehicles in the driver's blind spots and alerts the driver with a visual and audible warning.

To set up the BYD Blind Spot Monitoring system, follow these steps:1. Check that the BSM system is enabled. The BSM system is enabled by default, but you can check to make sure by going to the "Settings" menu on the infotainment system and selecting "Blind Spot Monitoring."
2. Adjust the sensitivity of the BSM system. The sensitivity of the BSM system can be adjusted to three levels: low, medium, and high. The higher the sensitivity, the more likely the system is to detect vehicles in your blind spots. You can adjust the sensitivity by going to the "Settings" menu on the infotainment system and selecting "Blind Spot Monitoring Sensitivity."
3. Set the BSM system to alert you with a visual and audible warning. The BSM system can alert you with a visual warning (a flashing light in the side mirror), an audible warning (a beeping sound), or both. You can set the system to alert you with either or both of these warnings by going to the "Settings" menu on the infotainment system and selecting "Blind Spot Monitoring Alert Type."

Here are some additional tips for using the BYD Blind Spot Monitoring system:* Keep the radar sensors clean. The radar sensors used by the BSM system are located in the rear bumper of the vehicle. It is important to keep these sensors clean so that they can function properly.
* Be aware of the system's limitations. The BSM system cannot detect all vehicles in your blind spots. For example, the system may not be able to detect vehicles that are very close to your vehicle or vehicles that are moving very slowly.
* Do not rely solely on the BSM system. The BSM system is a valuable safety feature, but it is not a substitute for good driving habits. Always be aware of your surroundings and check your blind spots before changing lanes.

By following these tips, you can help to ensure that the BYD Blind Spot Monitoring system is working properly and that you are using it effectively.

2024-12-30

Previous：MRTG Monitoring Video Tutorial

Next：Video Surveillance System: Inverted Image Correction Tutorial