Inspur Surveillance Camera Installation Guide130

Introduction

This guide provides step-by-step instructions for installing Inspur surveillance cameras. By following these instructions carefully, you can ensure that your cameras are properly installed and configured for optimal performance. Before you begin, gather the following tools and materials:
Inspur surveillance camera
Mounting bracket
Screws
Drill
Ethernet cable (optional)
Power adapter

Step 1: Choose a Location

Select a location for the camera that provides a clear view of the area you want to monitor. The camera should be mounted at a height of 8-10 feet off the ground. Avoid placing the camera in direct sunlight or near reflective surfaces, as this can interfere with the image quality.

Step 2: Mount the Camera

Use the included mounting bracket to mount the camera to a wall or ceiling. Secure the bracket to the surface using the provided screws. Once the bracket is installed, attach the camera to the bracket.

Step 3: Connect the Ethernet Cable (Optional)

If you want to connect the camera to a network, you will need to connect an Ethernet cable from the camera to a router or switch. Plug one end of the Ethernet cable into the camera's Ethernet port and the other end into an available port on the router or switch.

Step 4: Connect the Power Adapter

Plug the power adapter into the camera's power port. The camera will power on automatically.

Step 5: Configure the Camera

To configure the camera, open a web browser and enter the camera's IP address into the address bar. The default IP address is 192.168.1.108. Enter the default username and password (admin/admin) to log in.

In the camera's web interface, you can configure the following settings:
Video resolution
Frame rate
Image quality
Motion detection
Recording settings

Step 6: Test the Camera

Once you have configured the camera, test it to make sure it is working properly. View the live video feed from the camera in your web browser or using a mobile app. Trigger the motion detection and make sure the camera records footage. If the camera is not working properly, check the following:
The camera is connected to a power source.
The Ethernet cable is connected properly.
The camera's IP address is correct.
The camera's settings are configured correctly.

Troubleshooting

If you encounter any problems installing or configuring your Inspur surveillance camera, refer to the following troubleshooting tips:
The camera is not powering on. Make sure that the power adapter is properly connected to the camera and to a power source.
The camera is not connecting to the network. Make sure that the Ethernet cable is properly connected to the camera and to a router or switch. You can also try resetting the camera to its default settings.
The camera is not recording footage. Make sure that the camera's recording settings are configured correctly. You can also try resetting the camera to its default settings.
The camera is not sending notifications. Make sure that the camera's notification settings are configured correctly. You can also try resetting the camera to its default settings.

Conclusion

By following these instructions, you can easily install and configure your Inspur surveillance camera. If you encounter any problems, refer to the troubleshooting tips provided. With proper installation and configuration, your Inspur surveillance camera will provide you with years of reliable service.

2024-12-25

Previous：How to Dismantle and Assemble a Monitoring Dashboard

Next：How to Set Up Memory Monitoring