How to Reset Dahua Surveillance Devices98

For various reasons, you may need to reset your Dahua surveillance device, such as when you forget the password, encounter performance issues, or simply want to restore it to its default settings.

Resetting a Dahua surveillance device can be done in different methods, depending on the device model and its current status. Here are the most common methods:

Method 1: Using the Reset Button (For Most Models)
Locate the reset button on the device. It is usually a small, recessed button.
Use a paperclip or a similar tool to press and hold the reset button for about 10 to 15 seconds.
Keep holding the reset button until the device reboots. This may take a few minutes.
Once the device reboots, it will be restored to its default settings.

Method 2: Using the Web Interface (For Network-Connected Devices)
Access the device's web interface by typing its IP address into a web browser.
Log in with the default username and password (usually "admin" and "admin").
Navigate to the "System" or "Maintenance" section.
Find the "Reset" option and click on it.
Confirm that you want to reset the device and wait for it to reboot.

Method 3: Using the SmartPSS Software (For Some Models)
Download and install the SmartPSS software from the Dahua website.
Connect the device to the computer using an Ethernet cable.
Launch the SmartPSS software and click on the "Device Management" tab.
Select the device and click on the "Reset" button.
Confirm that you want to reset the device and wait for it to reboot.

Additional Considerations
Resetting a Dahua surveillance device will erase all custom settings, including passwords, network configurations, and camera settings.
If you have made any important configuration changes, make sure to back up the device settings before performing a reset.
If you cannot reset the device using the above methods, contact Dahua technical support for assistance.

ConclusionResetting a Dahua surveillance device is relatively straightforward, but it's essential to follow the correct procedure to avoid data loss. By using the appropriate method based on your device model and current status, you can easily restore your device to its default settings or troubleshoot any performance issues.

2024-12-24

Previous：All-Inclusive Guide to Video Surveillance Tutorials

Next：How to Set Up a Mobile Surveillance System