Hikvision CCTV Remote Access Tutorial341

##
Introduction:
Hikvision is a leading provider of surveillance and security solutions. Its products include CCTV cameras, NVRs, DVRs, and other accessories. This tutorial will guide you on how to remotely access a Hikvision CCTV system using a computer.
Prerequisites:
* Hikvision CCTV system with a public IP address
* Computer with an internet connection
* Web browser (e.g., Chrome, Firefox, Edge)
Step 1: Configure Port Forwarding:
* Log into your router's web interface using its default IP address (usually 192.168.1.1 or 192.168.0.1).
* Find the "Port Forwarding" or "Virtual Servers" section.
* Create a new port forwarding rule using the following settings:
* Protocol: TCP
* Port Range: 8000 (default Hikvision port)
* IP Address: IP address of the Hikvision device
Step 2: Obtain the Hikvision Device's IP Address:
* Connect a monitor and keyboard to the Hikvision device.
* Log into the device using the default username "admin" and password "12345".
* Navigate to "Network" > "TCP/IP".
* Check the "IP Address" field for the device's public IP address.
Step 3: Configure Hikvision IVMS Software:
* Download and install the Hikvision IVMS-4200 software from the official website.
* Launch the software and click on "Add Device".
* Select "IP Device" and enter the following information:
* IP Address: Public IP address of the Hikvision device
* Port: 8000 (default port)
* Username: admin
* Password: 12345
Step 4: Access the Camera Feed:
* Expand the device tree in the IVMS software.
* Right-click on the camera and select "Live View".
* You will now see the live camera feed.
Step 5: Configure Motion Detection (Optional):
* Go to the "Configuration" tab within the IVMS software.
* Expand the "Event" tree and select "Motion Detection".
* Configure the motion detection settings as desired.
Step 6: Enable Remote Access (Optional):
* In the IVMS software, go to "Configuration" > "System".
* Select the "Remote Access" tab.
* Enable the "Enable Remote Access" checkbox.
* Set the "Remote Port" to a value other than 8000 (e.g., 8080).
* Create a username and password for remote access.
Step 7: Access Remotely Using a Web Browser:
* Open a web browser and enter the following URL:
```
your_public_ip:your_remote_port
```
* Example: 123.456.789.10:8080
* You will be prompted to enter the username and password you set in Step 6.
* Once logged in, you will have access to the camera feed and other features of the system.
Troubleshooting:
* Cannot access the camera feed: Verify that the port forwarding rules are configured correctly, and that the Hikvision device is powered on and connected to the network.
* Motion detection not working: Ensure that the motion detection settings are configured correctly, and that the camera is pointing in the desired direction.
* Cannot access the system remotely: Check that the remote access feature is enabled in the IVMS software, and that the firewall is not blocking the connection.
Conclusion:
By following this tutorial, you can remotely access your Hikvision CCTV system using a computer. This allows you to monitor your property from anywhere with an internet connection. Remember to regularly update the firmware of your Hikvision devices and follow best practices for cybersecurity to ensure the security of your system.

2024-12-22

---

Previous：Open-Source Video Surveillance Tutorial

Next：How to Download and Install a Security Camera: A Comprehensive Guide