Eagle Eye Surveillance Installation Guide37

This comprehensive guide will walk you through the installation process of Eagle Eye surveillance cameras and NVRs. By following these steps carefully, you can ensure that your surveillance system is set up correctly and working optimally.

1. Pre-Installation Preparation

Before you begin the installation process, it is important to gather the necessary tools and materials. You will need the following:*
Eagle Eye camera(s) and NVR
Mounting hardware (for cameras)
Ethernet cables
Power cables
Screwdriver
Drill (for mounting cameras)

Once you have gathered all of the necessary materials, you can begin the installation process.

2. Camera Installation
Choose the camera location. The location of your camera will depend on the area you want to monitor. Consider factors such as the field of view, lighting conditions, and potential obstructions.
Mount the camera. Use the included mounting hardware to secure the camera in place. Make sure that the camera is level and pointing in the desired direction.
Connect the camera to the NVR. Use an Ethernet cable to connect the camera to the NVR. The Ethernet cable should be long enough to reach from the camera to the NVR.
Power on the camera. Connect the power cable to the camera and plug it into a power outlet.

3. NVR Installation
Choose the NVR location. The NVR should be placed in a secure location that is accessible for maintenance.
Mount the NVR. Use the included mounting hardware to secure the NVR in place.
Connect the NVR to the network. Use an Ethernet cable to connect the NVR to your network. The Ethernet cable should be long enough to reach from the NVR to your router.
Power on the NVR. Connect the power cable to the NVR and plug it into a power outlet.

4. Configuring the System
Log in to the NVR's web interface. Use the default username and password to log in to the NVR's web interface.
Add the cameras to the NVR. Click on the "Cameras" tab and then click on the "Add Camera" button. Enter the IP address of the camera and click on the "Add" button.
Configure the camera settings. Once the camera is added to the NVR, you can configure the camera settings. These settings include the camera name, resolution, frame rate, and motion detection settings.
Create a recording schedule. The NVR can be configured to record continuously or on a schedule. To create a recording schedule, click on the "Recording" tab and then click on the "Add Schedule" button.

5. Troubleshooting

If you encounter any problems during the installation or configuration process, you can refer to the following troubleshooting tips:*
Camera not connecting to the NVR. Check the Ethernet cable connection between the camera and the NVR. Make sure that the Ethernet cable is securely plugged into both the camera and the NVR.
NVR not recording video. Check the recording schedule to make sure that the NVR is set to record during the desired times. Also, check the hard drive space to make sure that there is enough space to store the recorded video.
Motion detection not working. Check the motion detection settings to make sure that they are configured correctly. Also, make sure that the camera is pointed in the desired direction and that there are no obstructions in the camera's field of view.

If you are still having problems, you can contact Eagle Eye customer support for assistance.

Conclusion

By following these steps, you can install and configure your Eagle Eye surveillance system correctly. With a properly installed and configured system, you can monitor your property and keep it safe.

2024-12-20

Previous：How to Build a Monitoring System: A Comprehensive Guide

Next：Latency Monitoring Tutorial Video