SeaHorse Monitoring Installation Guide305

This comprehensive guide provides step-by-step instructions on how to install and set up your SeaHorse Monitoring System. By following these detailed instructions, you can ensure a seamless installation and optimal performance of your monitoring system.

1. Pre-Installation Requirements
Gather the necessary tools and materials, including a drill, screws, cable ties, and a level.
Identify the desired installation location for the SeaHorse unit, ensuring it has a clear view of the area to be monitored.
Check the compatibility of your camera with the SeaHorse Monitoring System.

2. Camera Installation
Mark the mounting points for the camera bracket on the ceiling or wall.
Drill pilot holes and secure the bracket using the provided screws.
Mount the camera onto the bracket and adjust the angle for optimal coverage.
Tighten the screws to secure the camera in place.

3. SeaHorse Unit Installation
Choose a suitable location for the SeaHorse unit, considering its proximity to the camera and power source.
Use the provided screws or cable ties to securely mount the unit to the wall or ceiling.
Ensure that the SeaHorse unit is level to prevent false alarms.

4. Wiring
Connect the camera's power supply to a nearby power outlet.
Run the camera's video cable to the SeaHorse unit and connect it to the "Camera In" port.
Connect the SeaHorse unit to a power source using the provided power adapter.

5. Configuration
Access the SeaHorse unit's web interface using the provided IP address and password.
Configure the camera settings, including resolution, frame rate, and motion detection sensitivity.
Set up email and SMS alerts to receive notifications of detected motion.
Adjust the unit's settings to suit your specific monitoring needs.

6. Testing
Trigger motion in front of the camera to activate the SeaHorse unit.
Verify that email and SMS alerts are received as configured.
Review the recorded footage to ensure that the system is capturing the relevant areas.
Make any necessary adjustments to the camera settings or motion detection parameters.

7. Troubleshooting
Check power connections and cable integrity if the camera or SeaHorse unit is not functioning.
Ensure that the SeaHorse unit is connected to the internet for remote access.
Adjust the motion detection settings if the unit is triggering false alarms.
Contact the SeaHorse support team for assistance with unresolved issues.

Conclusion

By following these comprehensive installation instructions, you can successfully install and configure your SeaHorse Monitoring System. This advanced monitoring solution provides peace of mind by delivering real-time alerts and allowing you to monitor your property remotely. Enjoy the enhanced security and convenience offered by your SeaHorse Monitoring System.

2024-12-13

Previous：Comprehensive Guide to Playback Video Footage on Surveillance Systems

Next：Monitoring 139 Mailbox Setup