Where to Find 380 Monitoring Settings23

The 380 monitoring settings can be found in the device's web interface. To access the web interface, you will need to know the device's IP address. You can find the IP address by using the following steps:Open a web browser and type the following address into the address bar: 192.168.1.1Click on the "Login" button.Enter the default username and password, which are both "admin".Click on the "OK" button.

Once you are logged in, you will see the device's web interface. The 380 monitoring settings are located in the "Monitoring" section of the web interface. To access the Monitoring section, click on the "Monitoring" tab at the top of the web interface. The Monitoring section contains a number of different settings, including the following:Enable/Disable Monitoring: This setting allows you to enable or disable monitoring for the device.Monitoring Interval: This setting allows you to set the interval at which the device will perform monitoring tasks.Monitoring Threshold: This setting allows you to set a threshold for the amount of data that the device will monitor before it sends an alert.Alert Recipients: This setting allows you to specify the email addresses of the people who will be notified when the device sends an alert.

The 380 monitoring settings can be used to customize the way that the device monitors your network. By adjusting these settings, you can ensure that the device is monitoring the data that you are most interested in and that you are notified when the device detects a problem.

In addition to the settings in the web interface, you can also use the following methods to change the 380 monitoring settings:Command Line Interface (CLI): You can use the CLI to change the 380 monitoring settings by using the following commands:
enable
configure terminal
monitoring settings
SNMP: You can use SNMP to change the 380 monitoring settings by using the following MIBs:

SNMPv2-MIB::sysLocation
SNMPv2-MIB::sysContact
SNMPv2-MIB::sysName
SNMPv2-MIB::sysDescr

2024-12-12

Previous：Shutter Settings for Surveillance Cameras

Next：How to Monitor Paper Planes: A Comprehensive Guide

New