Swift Surveillance Installation Guide101

Introduction

Welcome to the Swift Surveillance Installation Guide. This guide will provide you with step-by-step instructions on how to install and configure your Swift surveillance system. Please read the entire guide carefully before beginning the installation process.

Step 1: Prepare Your Equipment

Before you begin the installation, please ensure that you have all of the necessary equipment. You will need:
Swift surveillance cameras
Swift surveillance recorder
Ethernet cables
Power cables
Screwdriver
Drill (for mounting cameras)

Step 2: Install the Recorder

The first step is to install the surveillance recorder. The recorder is the central component of the system, and it will be responsible for storing and managing the video footage from the cameras. To install the recorder:
Choose a location for the recorder. The location should be dry, well-ventilated, and out of direct sunlight.
Connect the power cable to the recorder and plug it into a power outlet.
Connect the Ethernet cable to the recorder and plug it into your network.

Step 3: Install the Cameras

Once the recorder is installed, you can begin installing the cameras. The cameras can be mounted on walls or ceilings, depending on your preference. To install a camera:
Choose a location for the camera. The location should provide a clear view of the area you want to monitor.
Drill a hole in the wall or ceiling for the camera's mounting bracket.
Attach the mounting bracket to the wall or ceiling.
Connect the power cable to the camera and plug it into a power outlet.
Connect the Ethernet cable to the camera and plug it into your network.

Step 4: Configure the System

Once the cameras are installed, you can begin configuring the system. To configure the system:
Open the web interface of the recorder.
Log in using the default username and password.
Go to the "Cameras" tab.
Click on the "Add Camera" button.
Enter the IP address of the camera.
Click on the "Save" button.

Step 5: Test the System

Once the system is configured, you can test it to ensure that it is working properly. To test the system:
Open the live view window.
Select a camera from the drop-down menu.
You should see the live video feed from the camera.

Congratulations! You have now successfully installed and configured your Swift surveillance system.

If you have any questions or need assistance, please consult the Swift Surveillance User Manual or contact Swift Surveillance Technical Support.

2024-11-19

Previous：Monitoring Device Setup for Enhanced Surveillance and Security

Next：How to Set Up a Monitor on the Same Network