Turpan Monitoring Installation Guide143

Introduction

This guide provides step-by-step instructions on how to install and configure a monitoring system in Turpan, China. The system will be used to monitor the environment and equipment in a remote location. The system will include a solar panel, battery, camera, and wireless transmitter.

Materials
Solar panel
Battery
Camera
Wireless transmitter
Mounting hardware
Tools

Installation

1. Install the solar panel
Choose a location for the solar panel that receives ample sunlight throughout the day.
Mount the solar panel to the chosen location using the mounting hardware provided.
Connect the solar panel to the battery using the wires provided.

2. Install the battery
Place the battery in a secure location near the solar panel.
Connect the battery to the solar panel using the wires provided.

3. Install the camera
Choose a location for the camera that provides a clear view of the area to be monitored.
Mount the camera to the chosen location using the mounting hardware provided.
Connect the camera to the wireless transmitter using the wires provided.

4. Install the wireless transmitter
Choose a location for the wireless transmitter that provides a clear line of sight to the receiver.
Mount the wireless transmitter to the chosen location using the mounting hardware provided.
Connect the wireless transmitter to the camera using the wires provided.

5. Configure the system
Power on the system.
Set the desired recording schedule.
Set the desired alarm settings.
Test the system to ensure it is working properly.

Maintenance

The monitoring system should be inspected and maintained regularly to ensure it is operating properly. The following maintenance tasks should be performed on a regular basis:
Clean the solar panel.
Check the battery level.
Inspect the camera lens.
Test the wireless transmitter.

Troubleshooting
The system is not powering on. Check the solar panel, battery, and connections.
The camera is not recording. Check the camera settings, connections, and lens.
The wireless transmitter is not sending data. Check the transmitter settings, connections, and line of sight.

2024-11-19

Previous：Is a Ventilation Fan Necessary in a Control Room?

Next：A Comprehensive Guide to Installing Monitoring Poles