How To Hardwire a Dash Cam For Parking Mode366

Introduction

A dash cam is a valuable tool for protecting yourself and your vehicle in the event of an accident. But did you know that most dash cams only record while your car is running? If you want to protect your car from theft or vandalism while it's parked, you'll need to hardwire your dash cam to your car's battery.

What is hardwiring?

Hardwiring is the process of connecting your dash cam directly to your car's electrical system. This allows the dash cam to draw power from the battery, even when the car is turned off.

Benefits of hardwiring

There are several benefits to hardwiring your dash cam, including:

Continuous recording: Hardwiring your dash cam allows it to record continuously, even when your car is parked. This means you'll have a record of any incidents that occur while your car is unattended.
Theft protection: If your car is stolen, a hardwired dash cam can help you track it down. The dash cam will continue to record even after the car has been stolen, so you'll have a record of the thief's movements.
Vandalism protection: A hardwired dash cam can also help you protect your car from vandalism. The dash cam will record any damage that is done to your car, so you'll have evidence to support your insurance claim.

How to hardwire a dash cam

Hardwiring a dash cam is a relatively simple process, but it does require some basic electrical knowledge. If you're not comfortable working with electricity, it's best to have a professional install your dash cam.

To hardwire your dash cam, you will need the following:

A hardwire kit
A drill
A screwdriver
Wire strippers
Electrical tape

Once you have all of your materials, follow these steps to hardwire your dash cam:

Disconnect the battery. Before you start working on your car's electrical system, it's important to disconnect the battery. This will prevent you from getting shocked or causing any damage to the car.
Find a suitable location for the dash cam. The best place to mount your dash cam is on the windshield, behind the rearview mirror. This will give you a clear view of the road ahead and behind.
Run the wires. Use the included hardwire kit to run the wires from the dash cam to the battery. Be sure to route the wires in a safe and secure manner, away from any moving parts.
Connect the wires. Connect the red wire from the hardwire kit to the positive terminal on the battery. Connect the black wire from the hardwire kit to the negative terminal on the battery.
Test the dash cam. Once you have connected the wires, turn on the dash cam to make sure it is working properly.
Reconnect the battery. Once you have tested the dash cam, reconnect the battery.

That's it! You have now successfully hardwired your dash cam.

Tips for hardwiring a dash cam

Here are a few tips for hardwiring a dash cam:

Use a high-quality hardwire kit. A cheap hardwire kit can damage your car's electrical system.
Run the wires in a safe and secure manner. Be sure to avoid routing the wires near any moving parts.
Test the dash cam before you reconnect the battery. This will ensure that the dash cam is working properly.
If you are not comfortable working with electricity, it is best to have a professional install your dash cam.

2024-11-10

Previous：USBix Monitoring Tutorial: Understanding and Utilizing USBix for Effective Monitoring

Next：How to Change the Language Settings on Your Monitor