How to Set Password for IP Camera on Computer251

Step 1: Access the Camera's Web Interface* Connect the camera to your computer using an Ethernet cable.
* Open your browser and type the camera's IP address in the address bar.
* The default IP address is usually printed on the camera's label or user manual.

Step 2: Log In to the Web Interface* Enter the default username and password (usually "admin").
* Click the "Login" button.

Step 3: Navigate to the Password Settings* Click on the "Configuration" tab.
* Select the "User Management" option.

Step 4: Change the Password* Enter the current password in the "Old Password" field.
* Enter the new password in the "New Password" field.
* Re-enter the new password in the "Confirm Password" field.
* Click the "Save" button.

Step 5: Log Out and Log Back In* Click the "Logout" button.
* Re-enter the new username and password to log back in.

Additional Tips:* Choose a strong password that is not easily guessed.
* Change your password regularly to enhance security.
* Enable two-factor authentication (if available) for added protection.
* Consider using a password management tool to securely store and manage your passwords.

Troubleshooting:* If you have forgotten your password, you may need to reset the camera to factory defaults. This will erase all configurations and settings.
* If you cannot access the web interface, check the following:
* Ensure that the camera is properly connected to your computer.
* Verify that you are using the correct IP address.
* Try using a different web browser.

2024-11-08

Previous：How to Find the Right Sensitivity Settings for Your Surveillance Equipment

Next：LAN Surveillance System Setup: A Comprehensive Guide