How to Disable Hikvision PTZ Camera Patrol (Cruising)100

Hikvision PTZ (Pan-Tilt-Zoom) cameras offer powerful features, including pre-set patrol routes, often referred to as cruising or patrolling. This automated function allows the camera to systematically scan a predefined area, enhancing surveillance coverage. However, there might be instances where you need to disable this cruising function, either temporarily or permanently. This guide provides a comprehensive walkthrough on how to effectively disable Hikvision PTZ camera patrolling, covering various methods and scenarios.

The specific steps for disabling the patrol function may vary slightly depending on the camera model and the interface you are using (e.g., Hikvision's iVMS-4200 software, web interface, or the mobile app). However, the general principles remain consistent. Before proceeding, ensure you have the necessary access credentials (username and password) to the camera's configuration settings.

Disabling Patrol Through the Web Interface

Most Hikvision PTZ cameras offer a web-based interface accessible through a web browser. This is a common method for managing camera settings. To disable the patrol function via the web interface:
Access the Camera's Web Interface: Open your web browser and enter the camera's IP address in the address bar. You'll likely need to know your camera's IP address beforehand. This information can typically be found on the camera's label or through your network's DHCP server.
Log In: Enter your username and password to access the camera's configuration settings. The default credentials are often "admin" for both username and password, but this might be changed after initial setup.
Navigate to PTZ Settings: The exact menu structure varies depending on the camera model, but you'll typically find a section related to PTZ control, or similar terminology. Look for options like "PTZ Control," "Preset," "Patrol," or "Cruise."
Locate the Patrol/Cruise Settings: Within the PTZ settings, locate the menu or tab specifically dedicated to patrol or cruising. This section often lists the pre-set points included in the patrol route.
Disable the Patrol: You should find an option to either "Disable Patrol," "Stop Patrol," or a similar command. Activating this option will cease the camera's automated patrolling. In some cases, you may need to delete the pre-set points defining the patrol route before disabling it.
Save Changes: Once you've disabled the patrol, remember to save your changes. The specific button or option for saving will vary depending on the interface design.

Disabling Patrol Using Hikvision iVMS-4200 Software

Hikvision's iVMS-4200 is a powerful software application for managing multiple Hikvision devices. Disabling patrol through this software is generally more straightforward than using the web interface, especially for managing multiple cameras.
Add the Camera to iVMS-4200: Ensure your Hikvision PTZ camera is added and configured correctly within the iVMS-4200 software.
Select the Camera: In the software's interface, select the specific PTZ camera you wish to modify.
Access PTZ Control: Find the PTZ control options for the selected camera. This may involve right-clicking the camera's icon or navigating to a control panel.
Disable Patrol: Look for a "Patrol" or "Cruise" button or option. This usually provides an on/off toggle or a way to delete the existing patrol route. Disabling this will stop the camera's patrol.

Troubleshooting and Common Issues

If you encounter difficulties disabling the patrol function, consider these troubleshooting steps:
Check Network Connectivity: Ensure the camera has a stable network connection.
Verify Access Rights: Confirm you are logged in with an account possessing the necessary permissions to modify camera settings.
Firmware Updates: Outdated firmware can sometimes cause unexpected behavior. Check for and install any available firmware updates for your camera model.
Consult the Camera's Manual: The camera's manual provides detailed instructions specific to its model and features.
Contact Hikvision Support: If you continue to experience problems, contact Hikvision technical support for assistance.

Remember to always save your changes after making any modifications to the camera's settings. Disabling the patrol function will stop the camera from automatically scanning the predefined area, so you should consider whether alternative monitoring methods are necessary to maintain adequate surveillance.

2025-04-05

Previous：Hikvision Camera Focus Adjustment: A Comprehensive Guide to Troubleshooting and Optimizing Your Surveillance System

Next：Hikvision Security Camera: Troubleshooting Password Errors and Enhancing Security