Hikvision Analog CCTV Recorder Factory Reset131

Analog CCTV recorders are a legacy technology that is still widely used today. In order to reset a Hikvision analog CCTV recorder to its factory default settings, you will need to follow a few simple steps.

Step 1: Obtain the reset button

The reset button on a Hikvision analog CCTV recorder is usually a small, recessed button located on the back or bottom of the unit. In some cases, the reset button may be located inside a small hole. You will need to use a paperclip or a similar object to press the reset button.

Step 2: Press and hold the reset button

Once you have located the reset button, press and hold it for 10-15 seconds. The recorder will reboot and the factory default settings will be restored.

Step 3: Reconfigure the recorder

After the recorder has rebooted, you will need to reconfigure it to your desired settings. This includes setting the time and date, changing the password, and adding cameras.

Additional notes

If you are having difficulty resetting your Hikvision analog CCTV recorder to its factory default settings, you may need to consult the user manual for your specific model. You can also contact Hikvision technical support for assistance.

Here are some additional tips for resetting a Hikvision analog CCTV recorder:
Make sure that the recorder is powered off before pressing the reset button.
Press and hold the reset button for at least 10 seconds. Do not release the button until the recorder reboots.
If the recorder does not reboot after pressing the reset button, try again. You may need to press the button for longer or harder.
Once the recorder has rebooted, you will need to reconfigure it to your desired settings.

By following these steps, you should be able to successfully reset your Hikvision analog CCTV recorder to its factory default settings.

2024-11-02

Previous：Top Recommendations for Dog House Monitoring

Next：How to Watch Hikvision Security Cameras Online