Hikvision NVR Surveillance Camera Recording Settings111

Hikvision NVRs are powerful surveillance devices that allow you to record and store video footage from your security cameras. To ensure that your NVR is recording the footage you need, it is important to configure the recording settings correctly. This guide will provide you with step-by-step instructions on how to set up the recording settings on your Hikvision NVR.

Step 1: Open the NVR's web interface

The first step is to open the NVR's web interface. To do this, you will need to know the NVR's IP address. Once you have the IP address, open a web browser and enter the IP address into the address bar. You will be prompted to enter a username and password. The default username is "admin" and the default password is "12345".

Step 2: Navigate to the recording settings

Once you are logged into the NVR's web interface, navigate to the recording settings. To do this, click on the "Configuration" tab and then click on the "Recording" sub-tab.

Step 3: Configure the recording schedule

The recording schedule determines when the NVR will record footage. By default, the NVR will record footage 24/7. However, you can change the recording schedule to record footage only during certain times of day or night. To do this, click on the "Recording Schedule" tab and then select the desired recording schedule.

Step 4: Configure the recording resolution

The recording resolution determines the quality of the recorded footage. The higher the resolution, the better the quality of the footage. However, higher resolutions require more storage space. To configure the recording resolution, click on the "Recording Resolution" tab and then select the desired resolution.

Step 5: Configure the frame rate

The frame rate determines the number of frames per second that the NVR will record. The higher the frame rate, the smoother the recorded footage will be. However, higher frame rates require more processing power and storage space. To configure the frame rate, click on the "Frame Rate" tab and then select the desired frame rate.

Step 6: Configure the bitrate

The bitrate determines the amount of data that is used to encode each frame of footage. The higher the bitrate, the better the quality of the recorded footage. However, higher bitrates require more storage space. To configure the bitrate, click on the "Bitrate" tab and then select the desired bitrate.

Step 7: Configure the pre- and post-recording time

The pre- and post-recording time determines the amount of footage that is recorded before and after an event is triggered. To configure the pre- and post-recording time, click on the "Pre- and Post-Recording Time" tab and then enter the desired pre- and post-recording time.

Step 8: Save the changes

Once you have configured the recording settings, click on the "Save" button to save the changes. The NVR will now record footage according to the settings you have configured.

Additional tips

Here are a few additional tips for configuring the recording settings on your Hikvision NVR:
If you are unsure about which recording settings to use, you can consult with a security professional.
You can use the NVR's live view to test the recording settings before you save them.
You can schedule the NVR to automatically back up the recorded footage to a network storage device.

2024-11-02

Previous：Hikvision Cameras with Dahua NVRs: Compatibility and Considerations

Next：Module Selection Recommendations for Surveillance Systems