How to Reset a Hikvision Security Camera233

Resetting a Hikvision security camera can be necessary for various reasons, such as when you have forgotten the password, the camera is malfunctioning, or you want to restore it to its factory default settings. Here's a comprehensive guide on how to reset a Hikvision security camera:

Method 1: Reset Button

Most Hikvision security cameras have a physical reset button. To reset the camera using this method:1. Locate the reset button on the camera. It's typically a small, recessed button, often hidden under a rubber cover.
2. Use a paperclip or a toothpick to press and hold the reset button for about 10 seconds.
3. The camera will reboot, and its settings will be restored to factory defaults.

Method 2: Web Interface

If the reset button is inaccessible or not working, you can reset the camera through its web interface:1. Access the camera's web interface by typing its IP address into a web browser. You can find the IP address on the camera's label or by using a network scanner.
2. Log in to the web interface using the default username and password ("admin" and "12345").
3. Navigate to the "Configuration" or "System" tab.
4. Look for the "Restore to Factory Default" or "Reset" option.
5. Click on the reset button and confirm your action.
6. The camera will reboot and reset to its factory settings.

Method 3: SADP Tool

SADP (Smart Assistant Device Protocol) is a software tool provided by Hikvision that allows you to manage and configure network devices. You can use the SADP tool to reset the camera:1. Download the SADP tool from the Hikvision website.
2. Install and launch the tool.
3. Click on the "Search" button to discover the camera on the network.
4. Select the camera and click on the "Reset" button.
5. Confirm your action, and the camera will reset to factory defaults.

Tips:

- Before resetting the camera, make sure to back up its configuration settings. This will allow you to restore them if necessary.
- If you have forgotten the camera's password, you can perform a "hard reset" by disconnecting the camera from power, waiting for 30 seconds, and then reconnecting it. This will reset the password to the default ("12345").
- If you encounter any issues while resetting the camera, consult the user manual or contact Hikvision technical support for assistance.

2024-11-02

Previous：Restaurant Surveillance Recommendations

Next：CCTV Monitoring Desk Recommendations: Enhancing Security and Efficiency