Hikvision Integrated Surveillance Center Installation Guide286

Introduction

Hikvision Integrated Surveillance Center (IVS) is a comprehensive software solution designed to provide centralized monitoring and management of surveillance systems. This guide provides step-by-step instructions on how to install and configure the IVS software on your system.

Prerequisites

Before installing the IVS software, you must ensure that the following prerequisites are met:
Windows operating system (Windows 7 or later)
Intel or AMD processor with a minimum of 2 GHz
4 GB of RAM or more
100 GB of free hard disk space
Network connection

Installation

To install the IVS software, follow these steps:1.

Download the IVS software from the Hikvision website.2.

Run the IVS setup wizard and follow the on-screen instructions.3.

Select the installation directory and click "Install".4.

Wait for the installation to complete. Once the installation is complete, click "Finish".

Configuration

After the installation is complete, you need to configure the IVS software to connect to your surveillance system.1.

Launch the IVS software.2.

Click on the "Configuration" tab.3.

In the "System Configuration" section, enter the following information:
Server name
Server port
Username
Password

4.

Click on the "Apply" button.5.

In the "Camera Management" section, click on the "Add" button.6.

Enter the following information:
Camera name
Camera IP address
Camera port
Camera username
Camera password

7.

Click on the "OK" button.8.

Repeat steps 5-7 for each camera that you want to add to the IVS system.9.

Once you have added all of the cameras, click on the "Apply" button.

Operation

Once the IVS software is configured, you can start using it to monitor your surveillance system.1.

Click on the "Live View" tab.2.

Select the camera that you want to view.3.

Click on the "Play" button.

You can also use the IVS software to record and playback video footage, configure motion detection and other alerts, and create reports.

Troubleshooting

If you encounter any problems while using the IVS software, you can try the following troubleshooting tips:
Make sure that the IVS software is installed on the same computer as the surveillance system.
Make sure that the IVS software is configured with the correct server name and port.
Make sure that the cameras are added to the IVS system and that they are online.
Make sure that the firewall is not blocking the IVS software.
If you are still having problems, you can contact Hikvision technical support.

2024-11-01

Previous：Qingpu District‘s Top Picks for Shop Surveillance

Next：Video Surveillance Interview Questions Guide