How to Change the IP Address of a Hikvision Camera75

IntroductionChanging the IP address of a Hikvision camera is a relatively simple process that can be completed in a few minutes. There are two ways to change the IP address: using the web interface or using the SADP tool. In this article, we will discuss both methods.

Method 1: Using the Web Interface1. Open a web browser and enter the IP address of the camera into the address bar. The default IP address is usually 192.168.1.64.
2. Enter the username and password for the camera. The default username is "admin" and the default password is "12345".
3. Click on the "Network" tab.
4. Click on the "TCP/IP" tab.
5. Enter the new IP address, subnet mask, and gateway address.
6. Click on the "Apply" button.
7. The camera will reboot and the new IP address will be applied.

Method 2: Using the SADP Tool1. Download the SADP tool from the Hikvision website.
2. Install the SADP tool on your computer.
3. Open the SADP tool and click on the "Search" button.
4. The SADP tool will search for all Hikvision cameras on the network.
5. Once the camera is found, click on the "Modify" button.
6. Enter the new IP address, subnet mask, and gateway address.
7. Click on the "Save" button.
8. The camera will reboot and the new IP address will be applied.

Tips* If you are having trouble changing the IP address of the camera, try resetting the camera to factory defaults.
* You can also use the SADP tool to change other settings on the camera, such as the username and password.
* It is important to use a static IP address for the camera. This will ensure that the camera can always be accessed at the same IP address.

ConclusionChanging the IP address of a Hikvision camera is a simple process that can be completed in a few minutes. By following the steps outlined in this article, you can easily change the IP address of your camera.

2024-10-31

Previous：Wireless Hikvision Surveillance System: Comprehensive Guide

Next：Hikvision Camera‘s Power Jack Malfunction and Troubleshooting Guide