How to Switch HaiKang Surveillance to PC243

IntroductionHaiKang is a renowned manufacturer of surveillance equipment, offering a wide range of cameras, NVRs (network video recorders), and other devices. While these devices typically come with their own dedicated software for viewing and managing surveillance footage, there may be instances when you need to switch the surveillance feed to a PC. This article provides a comprehensive guide on how to achieve this seamlessly.

PrerequisitesBefore proceeding, ensure you have the following:
A HaiKang surveillance camera
A HaiKang NVR (optional)
A PC with an active internet connection
The latest version of the HaiKang surveillance software installed on the PC

Method 1: Direct Camera ConnectionIf you have a HaiKang surveillance camera without an NVR, you can directly connect it to your PC. Here's how:
Connect the camera to your PC using an Ethernet cable or Wi-Fi.
Launch the HaiKang surveillance software on your PC.
Click on "Add Device" and select "IP Camera."
Enter the camera's IP address, username, and password.
Click on "OK" to add the camera.

Method 2: NVR-Based ConnectionIf you have a HaiKang NVR, follow these steps to connect the surveillance feed to your PC:
Connect the NVR to your PC using an Ethernet cable.
Launch the HaiKang surveillance software on your PC.
Click on "Add Device" and select "NVR."
Enter the NVR's IP address, username, and password.
Click on "OK" to add the NVR.

Viewing the Surveillance FeedOnce you have added the camera or NVR to the HaiKang surveillance software, you can view the live surveillance feed on your PC. Here's how:
Select the camera or NVR from the device list.
Click on the "Live View" tab.
The live surveillance feed will appear in the viewing window.

Additional OptionsThe HaiKang surveillance software offers additional options for managing and viewing the surveillance feed on your PC. These include:
Recording: You can record the surveillance feed to your PC for later playback.
Playback: You can playback recorded surveillance footage from the software.
Remote Access: You can remotely access the surveillance feed from anywhere with an internet connection.
Motion Detection: You can set up motion detection alerts to receive notifications when movement is detected.
Event Management: You can create rules to trigger specific actions based on events, such as sending email alerts.

TroubleshootingIf you encounter any issues while switching the surveillance feed to your PC, try the following troubleshooting steps:
Ensure that the camera or NVR is connected to the network and is powered on.
Check the IP address, username, and password of the camera or NVR.
Verify that the HaiKang surveillance software is up to date.
Restart the HaiKang surveillance software and try again.
If the issue persists, contact HaiKang technical support for assistance.

ConclusionSwitching HaiKang surveillance to PC is a straightforward process that can be completed in a few simple steps. By following the instructions outlined in this guide, you can seamlessly monitor and manage your surveillance feed from the convenience of your PC. The additional options provided by the HaiKang surveillance software empower you with advanced features for comprehensive surveillance management.

2024-10-30

Previous：Where to Find & Configure Camera Settings in Hikvision Surveillance Systems

Next：Zhuhai Hai Xiangzhou Hikvision Surveillance Project