How to Configure Hikvision Elevator Monitoring Mode271

Introduction
Hikvision is one of the leading manufacturers of video surveillance equipment, including elevator monitoring systems. These systems are designed to provide security and peace of mind for building owners and occupants by monitoring elevator activity and providing real-time alerts in the event of an emergency.
Configuring Elevator Monitoring Mode
To configure elevator monitoring mode on a Hikvision camera, you will need to access the camera's web interface. Once you are logged in, navigate to the "Video" tab and select "Event Management."
Under "Event Management," you will see a section called "Elevator Monitoring." This is where you will configure the settings for elevator monitoring mode.
Step 1: Enable Elevator Monitoring
The first step is to enable elevator monitoring mode. To do this, check the box next to "Enable Elevator Monitoring."
Step 2: Configure Event Triggers
Next, you need to configure the event triggers that will activate elevator monitoring mode. You can choose from the following triggers:
* Motion Detection: This trigger will activate elevator monitoring mode when motion is detected in the elevator car.
* Door Open/Close: This trigger will activate elevator monitoring mode when the elevator door opens or closes.
* Floor Arrival: This trigger will activate elevator monitoring mode when the elevator arrives at a floor.
* Manual Trigger: This trigger allows you to manually activate elevator monitoring mode.
Step 3: Configure Event Actions
Once you have configured the event triggers, you need to configure the event actions that will be performed when elevator monitoring mode is activated. You can choose from the following actions:
* Send Email: This action will send an email notification to a specified email address when elevator monitoring mode is activated.
* Send SMS: This action will send an SMS notification to a specified phone number when elevator monitoring mode is activated.
* Play Audio Alarm: This action will play an audio alarm when elevator monitoring mode is activated.
* Trigger Output: This action will trigger an output device, such as a relay or siren, when elevator monitoring mode is activated.
Step 4: Save Settings
Once you have configured the elevator monitoring settings, click the "Save" button to save your changes.
Testing Elevator Monitoring Mode
Once you have configured elevator monitoring mode, you can test it to make sure it is working properly. To do this, trigger one of the event triggers that you configured in Step 2. If the event actions that you configured in Step 3 are performed, then elevator monitoring mode is working properly.
Conclusion
Elevator monitoring mode is a valuable feature that can help to improve the security of your building. By following the steps outlined in this article, you can configure elevator monitoring mode on your Hikvision camera and ensure that it is working properly.

2024-10-30

---

Previous：The Ultimate Guide to Finding the Perfect Video Surveillance Enclosures

Next：Hotel Surveillance: How to Choose the Best Memory Card for Your System