How to Turn on Lights with Hikvision Surveillance214

Hikvision, a leading provider of surveillance and security solutions, offers a wide range of features and functionalities to enhance user experience and convenience. Among these features is the ability to control lighting remotely through its surveillance cameras and associated software. This article will provide a comprehensive guide on how to turn on lights with Hikvision surveillance, covering the necessary hardware, software, and step-by-step instructions.

Required Hardware and Software

To turn on lights with Hikvision surveillance, you will need the following hardware and software components:
Hikvision surveillance camera with built-in relay or external relay module
Light fixture or bulb with compatible socket
Hikvision iVMS-4200 software

Step-by-Step Instructions

Once you have gathered the necessary hardware and software, follow these steps to turn on lights with Hikvision surveillance:

1. Connect the Camera and Relay Module

If your Hikvision camera has a built-in relay, skip this step. Otherwise, connect an external relay module to the camera's I/O ports according to the manufacturer's instructions. The relay module will act as an interface between the camera and the light fixture.

2. Connect the Light Fixture

Connect the light fixture or bulb to the relay module using the appropriate socket. Ensure that the connections are secure and the light fixture is functioning properly.

3. Configure the Camera and Relay Module

Log in to the Hikvision iVMS-4200 software and navigate to the "Configuration" tab. Select the camera you want to use for light control and click on the "Output" tab. Here, configure the relay module settings according to the manufacturer's instructions. Typically, you will need to specify the relay number, trigger mode (manual or event-based), and output duration.

4. Enable Light Control from the Software

Still in the iVMS-4200 software, navigate to the "Live View" tab. Select the camera you configured in the previous step and click on the "Light Control" icon. This will open a pop-up window where you can manually turn on or off the connected light fixture by clicking on the respective buttons.

5. Configure Event-Based Light Control (Optional)

If you want the lights to turn on automatically based on specific events, such as motion detection or alarm triggers, you can configure event-based light control. To do this, navigate to the "Event" tab in the iVMS-4200 software, create a new event rule, and select the "Output Control" action. In the action settings, specify the relay module and output duration.

Additional Tips
Ensure that the camera has a clear view of the area where the light fixture is located.
Test the light control functionality before relying on it for security purposes.
Consider using smart light bulbs or fixtures that can be controlled remotely via Wi-Fi or Bluetooth for added convenience.
Refer to the Hikvision user manual or online documentation for specific model and configuration details.

2025-02-01

Previous：High-Definition Surveillance Solutions by Hikvision

Next：Hikvision Surveillance: Adding Audio Capabilities