How to Wire Hikvision Surveillance Connectors71

Hikvision surveillance connectors are used to connect surveillance cameras to network video recorders (NVRs) or other network devices. They are typically used in security systems to transmit video and audio signals over Ethernet cables. In this article, we will provide a step-by-step guide on how to wire Hikvision surveillance connectors.

Materials You Will Need* Hikvision surveillance camera
* Network video recorder (NVR)
* Ethernet cable
* Crimping tool
* RJ45 connectors

Step 1: Prepare the Ethernet Cable* Cut the Ethernet cable to the desired length.
* Strip the outer jacket of the Ethernet cable about 1 inch from the end.
* Untwist the four pairs of wires and straighten them out.

Step 2: Identify the Wire Colors* The colors of the wires in an Ethernet cable are standardized. The following table shows the color code for each wire:
* Orange/White
* Orange
* Green/White
* Blue
* Blue/White
* Green
* Brown/White
* Brown
* The order of the wires is also important. The following table shows the correct order for the wires in a Hikvision surveillance connector:
* Orange/White
* Orange
* Green/White
* Blue
* Blue/White
* Green
* Brown/White
* Brown

Step 3: Crimp the RJ45 Connector* Insert the wires into the RJ45 connector according to the color code.
* Make sure the wires are fully inserted into the connector.
* Use the crimping tool to crimp the RJ45 connector onto the Ethernet cable.
* Check to make sure the wires are securely crimped.

Step 4: Connect the Hikvision Surveillance Camera* Connect one end of the Ethernet cable to the Hikvision surveillance camera.
* Connect the other end of the Ethernet cable to the NVR.

Step 5: Power On the Devices* Power on the Hikvision surveillance camera.
* Power on the NVR.

Step 6: Test the Connection* Open the NVR's web interface.
* Click on the "Cameras" tab.
* Select the Hikvision surveillance camera from the list.
* Click on the "Live View" button.
* You should now see the live video from the Hikvision surveillance camera.

Troubleshooting* If you are having trouble connecting the Hikvision surveillance camera to the NVR, there are a few things you can check:
* Make sure the Ethernet cable is properly crimped.
* Make sure the Ethernet cable is connected to the correct ports on the surveillance camera and the NVR.
* Make sure the Hikvision surveillance camera is powered on.
* Make sure the NVR is powered on.
* If you are still having trouble connecting the Hikvision surveillance camera to the NVR, you may need to contact Hikvision technical support.

2025-01-25

Previous：Live Stream Playback Monitoring Recommendations

Next：Seamless Power Monitoring: Unlocking Efficiency and Reliability with Hikvision Power Monitoring Systems