How to Reset Wi-Fi on Hikvision Surveillance Devices113

Hikvision surveillance devices are widely used for home and commercial security applications. These devices offer various features such as high-quality video surveillance, remote access, and advanced analytics. However, like any electronic device, Hikvision surveillance devices may encounter issues related to Wi-Fi connectivity. If you're experiencing such issues, resetting the Wi-Fi settings can often resolve them.

Resetting the Wi-Fi settings on Hikvision surveillance devices is a simple process that can be performed using the device's physical buttons, the SADP tool provided by Hikvision, or through the device's web interface. In this article, we will guide you through the steps involved in each of these methods.

Method 1: Using Physical Buttons

Most Hikvision surveillance devices have a physical reset button. This button is typically located at the back or bottom of the device and is recessed to prevent accidental pressing. To reset the Wi-Fi settings using the physical button, follow these steps:
Locate the reset button on your Hikvision surveillance device.
Use a pointed object, such as a paperclip or a pen, to press and hold the reset button for about 10 seconds.
Release the reset button and wait for the device to reboot.
After the device reboots, the Wi-Fi settings will be reset to their default values.

Method 2: Using SADP Tool

The SADP (Search Active Device Protocol) tool is a software provided by Hikvision that allows you to search for and manage Hikvision devices on a network. The SADP tool can also be used to reset the Wi-Fi settings on Hikvision surveillance devices.
Download and install the SADP tool from the Hikvision website.
Connect your Hikvision surveillance device to the network using an Ethernet cable.
Run the SADP tool and wait for it to detect your device.
Select your device from the list and click on the "Configuration" tab.
In the "Configuration" tab, navigate to the "Network" section.
Click on the "Reset Wi-Fi" button.
Click on the "OK" button to confirm the reset.
After the reset process is complete, the Wi-Fi settings on your device will be reset to their default values.

Method 3: Using Web Interface

If your Hikvision surveillance device has a web interface, you can use it to reset the Wi-Fi settings.
Connect your Hikvision surveillance device to the network using an Ethernet cable.
Open a web browser and enter the IP address of your device in the address bar.
Enter the username and password for your device.
Navigate to the "Network" section in the web interface.
Click on the "Wi-Fi" tab.
Click on the "Reset" button.
Click on the "OK" button to confirm the reset.
After the reset process is complete, the Wi-Fi settings on your device will be reset to their default values.

Conclusion

Resetting the Wi-Fi settings on Hikvision surveillance devices is a simple process that can be performed using the device's physical buttons, the SADP tool, or through the device's web interface. By following the steps outlined in this article, you can easily reset the Wi-Fi settings on your Hikvision surveillance device and resolve any connectivity issues you may be experiencing.

2025-01-13

Previous：Chengdu Escape Room Monitoring Recommendations

Next：Affordable Pet Monitoring: Top Picks for Peace of Mind