How to Change the IP Address Range of a Hikvision Surveillance Device52

Hikvision surveillance devices, such as IP cameras and NVRs, come with a default IP address range of 192.168.1.x. This range may conflict with other devices on your network, so it may be necessary to change it.

To change the IP address range of a Hikvision surveillance device, you will need to access the device's web interface. To do this, you will need to know the device's IP address. If you do not know the device's IP address, you can use the SADP (Search Active Devices Protocol) tool to find it.

Once you have the device's IP address, you can access the device's web interface by typing it into a web browser. The default username and password for Hikvision surveillance devices is "admin".

Once you are logged into the device's web interface, you will need to navigate to the "Network" tab. In the "Network" tab, you will find the "IP Address" section. In the "IP Address" section, you will be able to change the device's IP address range.

Once you have changed the device's IP address range, you will need to click the "Save" button to save your changes.

Additional Notes

Here are some additional notes about changing the IP address range of a Hikvision surveillance device:
If you change the device's IP address range, you will need to update any other devices that are connected to the device.
If you are using a DHCP server to assign IP addresses to your devices, you will need to add the device's MAC address to the DHCP server's reservation list.
If you are still having trouble changing the device's IP address range, you can contact Hikvision technical support for assistance.

2025-01-10

Previous：Hikvision Explosion-Proof Surveillance Maintenance: A Comprehensive Guide

Next：Best Practices for Monitoring Network Configuration