How to Change WiFi on Hikvision Cameras307

If you need to change the WiFi network that your Hikvision camera is connected to, you can do so by following these steps:
Open the Hikvision camera's web interface. To do this, enter the camera's IP address into a web browser. The default IP address for Hikvision cameras is 192.168.1.64.
Log in to the camera. The default username and password are "admin" and "12345".
Click on the "Network" tab.
Select the "Wireless" tab.
Enter the SSID of the WiFi network that you want the camera to connect to.
Enter the password for the WiFi network.
Click on the "Save" button.

The camera will now reboot and connect to the new WiFi network. You can check the camera's status by clicking on the "Status" tab. The "Network Status" section will show the camera's current IP address and WiFi connection status.Additional Notes:
* If you are having trouble connecting the camera to a WiFi network, you can try resetting the camera to its default settings. To do this, press and hold the reset button on the camera for 10 seconds.
* If you are using a wireless router, you may need to disable the router's firewall in order to allow the camera to connect.
* If you are still having problems connecting the camera to a WiFi network, you can contact Hikvision technical support for assistance.

Troubleshooting* If you are unable to access the camera's web interface, the camera may not be connected to the network. Check the camera's Ethernet cable or WiFi connection.
* If you are able to access the camera's web interface but are unable to change the WiFi settings, the camera may be locked down by a password. Contact the camera's administrator for the password.
* If you are still having problems changing the WiFi settings on your Hikvision camera, contact Hikvision technical support for assistance.

2025-01-01

Previous：The Ultimate Guide to Choosing the Best Rotary Hammer for Security Camera Installations

Next：Monitor Recommendations for Connecting to Wi-Fi