Hikvision Surveillance Connector Wiring Guide141

Introduction

Hikvision surveillance cameras are widely used in various security and surveillance systems. To ensure proper functionality, it is essential to connect the cameras correctly. This guide provides comprehensive instructions on the wiring of Hikvision surveillance connectors, including the pinout, color coding, and connection procedure.

Pinout and Color Coding

Hikvision surveillance cameras typically use RJ-45 connectors with the following pinout and color coding:

Pin
Color
Signal


1
Orange/White
Ethernet Data+ (Tx+)


2
Orange
Ethernet Data- (Tx-)


3
Green/White
Ethernet Data+ (Rx+)


4
Blue
Ethernet Data- (Rx-)


5
Blue/White
GND


6
Green
+12V (Power)


7
Brown/White
Not used


8
Brown
Alarm out / +12V (Power)

Connection Procedure

To connect the Hikvision surveillance camera, follow these steps:

Identify the Cables

Identify the network cable (Ethernet) and the power cable. The network cable typically has an RJ-45 connector, while the power cable may have a DC plug or a screw terminal.

Connect the Network Cable

Connect the RJ-45 connector of the network cable to the RJ-45 port on the camera. Ensure that the color coding on the cable matches the pinout of the camera.

Connect the Power Cable

Connect the power cable to the camera. If using a DC plug, connect the positive (+) terminal of the power cable to the red terminal on the camera. If using a screw terminal, connect the red power wire to the "+12V" terminal and the black ground wire to the "GND" terminal.

Check the Connection

After connecting the cables, verify the connection by powering on the camera. Check the camera's status light to ensure it is operating properly.

Troubleshooting

If you encounter any issues with the connection, refer to the following troubleshooting tips:
Check the cable connections to ensure they are secure.
Verify the power source and make sure it is supplying the correct voltage.
Check the camera settings to ensure they are configured properly.
If the camera still does not connect, try resetting it by pressing the reset button.

Conclusion

By following the instructions in this guide, you can successfully wire Hikvision surveillance connectors. Proper wiring is crucial for ensuring reliable performance and preventing any potential issues with the surveillance system.

2025-01-01

Previous：Surveillance Night Vision Full Color Recommendation

Next：HIKVISION Surveillance Smart Search: Empowering Smarter and More Efficient Video Surveillance