Hikvision 8700 NVR Configuration: A Comprehensive Guide62

Introduction

Hikvision 8700 NVR is an advanced network video recorder that offers exceptional performance and reliability. With its powerful hardware and versatile features, the 8700 NVR is an ideal choice for various surveillance applications. This comprehensive guide will provide step-by-step instructions on how to configure the Hikvision 8700 NVR to meet your specific requirements.

Step 1: Hardware Installation

1. Unpack the Hikvision 8700 NVR and its accessories.
2. Rack-mount the NVR using the provided bracket or place it on a flat surface.
3. Connect the power supply and turn on the NVR.
4. Connect the storage hard drives to the designated SATA ports.
5. Connect the network cable to the Ethernet port.

Step 2: Initial Setup

1. Access the NVR's web interface by entering its IP address in a web browser.
2. Login with the default username "admin" and password "12345".
3. The system will prompt you to change the default password for security reasons.
4. Select the system region and language.

Step 3: Adding Cameras

1. Go to "Configuration" -> "Camera Management" -> "Camera".
2. Click "Add" and enter the camera's IP address or scan for it on the network.
3. Select the camera's video protocol (e.g., ONVIF, Hikvision).
4. Enter the camera's username and password.
5. Click "Test" to ensure the connection is successful.
6. Add multiple cameras as needed.

Step 4: Configuring Recording

1. Go to "Configuration" -> "Recording" -> "Schedule".
2. Select the camera(s) you want to record from.
3. Choose a recording schedule (e.g., continuous, motion-triggered).
4. Set the recording resolution, frame rate, and bitrate.
5. Choose the storage path for the recordings.

Step 5: Configuring Motion Detection

1. Go to "Configuration" -> "Event" -> "Motion Detection".
2. Select the camera(s) you want to enable motion detection for.
3. Draw motion detection zones on the camera's live view.
4. Set the sensitivity, alarm type, and schedule for motion detection.

Step 6: Configuring Alerts

1. Go to "Configuration" -> "Notification" -> "Alert".
2. Configure the alert method (e.g., email, SMS).
3. Add recipients by entering their email addresses or phone numbers.
4. Select the trigger events (e.g., motion detection, camera disconnect).
5. Customize the alert message.

Step 7: Remote Access

1. Go to "Configuration" -> "Network" -> "Port Management".
2. Enable the necessary ports for remote access (e.g., HTTP, RTSP).
3. Access the NVR's web interface or view live feeds through a Hikvision mobile app.

Step 8: Troubleshooting

If you encounter any issues, refer to the following troubleshooting tips:

Check all physical connections.
Verify IP addresses and network settings.
Reset the NVR to default settings.
Contact Hikvision technical support.

Conclusion

By following the steps outlined in this guide, you can successfully configure your Hikvision 8700 NVR to enhance your surveillance capabilities. The NVR's advanced features, such as multi-camera support, flexible recording options, and customizable alerts, provide a robust solution for your security needs. With its user-friendly interface and comprehensive settings, the Hikvision 8700 NVR empowers you to monitor your premises effectively and safeguard your assets.

2024-12-20

Previous：Hikvision Centralized Video Storage Solutions

Next：Hikvision 8104 Remote Surveillance: Enhancing Security and Efficiency