How to Share Hikvision Surveillance Cameras206

Accessing the Hikvision Device

To begin the sharing process, you must first access the Hikvision device. This can be done through various methods, including the web interface, the mobile application, or the VMS (Video Management Software).

Web Interface

Enter the device's IP address into a web browser to access the web interface. The default IP address is usually 192.168.1.64. Enter the username and password to log in (default: admin/12345).

Mobile Application

Download the Hik-Connect mobile application from the App Store or Google Play. Create an account and log in. Add the device by scanning the QR code on the device or manually entering the device's serial number.

VMS

If you are using a VMS, such as iVMS-4200, add the device by inputting its IP address and login credentials.

Configuring Sharing Settings

Once you have accessed the device, navigate to the "Configuration" or "Share" section. Here, you will find various sharing options.

RTSP/ONVIF Sharing

RTSP (Real-Time Streaming Protocol) and ONVIF (Open Network Video Interface Forum) are common protocols used for sharing video streams. To enable RTSP/ONVIF sharing, check the corresponding boxes and configure the following settings:* RTSP Port: Specify the port number for RTSP streams (default: 554).
* ONVIF Port: Specify the port number for ONVIF streams (default: 8000).
* Username and Password: Create a separate username and password for RTSP/ONVIF sharing (recommended for security reasons).

P2P Sharing

P2P (peer-to-peer) sharing allows you to share the device with other users without exposing it to the internet. To enable P2P sharing, follow these steps:* Create a P2P Account: On the device, go to "Share" > "P2P Account" and register for a P2P account.
* Generate a Verification Code: Click "Generate" to obtain a verification code.
* Add a Receiver: In the "Share to" section, enter the receiver's email address or P2P ID.

Cloud Sharing

If your Hikvision device supports cloud services, you can store and share video remotely through a cloud platform. To enable cloud sharing, follow these steps:* Create a Cloud Account: Visit the Hikvision Cloud website and create an account.
* Bind the Device: On the device, go to "Share" > "Cloud" and bind the device with your cloud account.
* Invite Users: Log in to your Hikvision Cloud account and navigate to "Share" > "Invite Users" to add users and share the device.

Accessing Shared Devices

Once you have shared the device, users can access it using the following methods:

Web Browser

Enter the device's RTSP/ONVIF URL into a web browser, followed by the username and password you configured earlier.

Mobile Application

Use the Hik-Connect app and scan the QR code on the shared device. Alternatively, enter the P2P ID or cloud account information in the app.

VMS

Add the shared device to your VMS using the device's IP address or cloud account information.

Troubleshooting

If you encounter any issues while sharing your Hikvision device, try the following troubleshooting steps:* Check Network Connectivity: Ensure that both the sharing device and the receiving device are connected to the same network.
* Verify Username and Password: Double-check the username and password configured for RTSP/ONVIF or P2P sharing.
* Disable Firewall and Antivirus: Temporarily disable the firewall and antivirus software on both devices to eliminate any interference.
* Restart the Device: Power cycle the sharing device to resolve any temporary glitches.
* Contact Hikvision Support: If the issue persists, contact Hikvision technical support for assistance.

2024-12-19

Previous：Hikvision vs Dahua: A Comparison of Two Surveillance Industry Giants

Next：Home Security Camera Systems: Recommendations for Comprehensive Surveillance