Hikvision PoE Password | Resetting Hikvision PoE Passwords136

Introduction

Hikvision is a leading manufacturer of surveillance equipment, including IP cameras and PoE (Power over Ethernet) devices. Hikvision PoE devices are designed to provide power and data over a single Ethernet cable, simplifying installation and reducing the need for separate power supplies. However, if you forget the password for your Hikvision PoE device, you may need to reset it to gain access.

Steps to Reset Hikvision PoE Password

Method 1: Using the Device Management Tool
Download the Hikvision Device Management Tool from the Hikvision website.
Install the tool on your computer and launch it.
Connect your Hikvision PoE device to your computer using an Ethernet cable.
Select the device from the list and click on the "Password Reset" button.
Enter a new password and confirm it.
Click on the "Reset" button to complete the process.

Method 2: Using the SADP Tool
Download the Hikvision SADP (Search Active Device Protocol) tool from the Hikvision website.
Install the tool on your computer and launch it.
Connect your Hikvision PoE device to your computer using an Ethernet cable.
The SADP tool will automatically detect the device.
Select the device and click on the "Modify Password" button.
Enter a new password and confirm it.
Click on the "OK" button to complete the process.

Method 3: Using the Web Interface
Connect your Hikvision PoE device to your computer using an Ethernet cable.
Open a web browser and type the IP address of the device into the address bar.
The default IP address for Hikvision PoE devices is usually 192.168.1.108.
Enter the default username and password (admin/12345).
Navigate to the "System" tab.
Click on the "User Management" submenu.
Select the user account you want to reset the password for.
Click on the "Modify Password" button.
Enter a new password and confirm it.
Click on the "OK" button to complete the process.

Troubleshooting Tips
Make sure that you are using the correct IP address for your device.
Check that the Ethernet cable is properly connected to both your computer and the Hikvision device.
If you are using a firewall, make sure that it is not blocking communication with the Hikvision device.

Conclusion

Resetting the password for your Hikvision PoE device is a relatively simple process. By following the steps outlined in this article, you can easily regain access to your device and restore its functionality.

2024-12-18

Previous：Cat Monitoring Camera Recommendations

Next：Top Villa Monitoring Apps for Enhanced Security and Peace of Mind