How to Flash Firmware on Hikvision Surveillance Devices16

Hikvision, a leading manufacturer of surveillance equipment, regularly releases firmware updates to improve the performance, stability, and security of its devices. Updating firmware is essential for keeping your surveillance system running smoothly and protecting it from vulnerabilities. In this article, we will provide a step-by-step guide on how to flash firmware on Hikvision surveillance devices.

Prerequisites:* Hikvision surveillance device
* Hikvision firmware file (.dav file)
* TFTP client software (such as TFTPD32 or SolarWinds TFTP Server)
* Ethernet cable

Step 1: Download the Firmware File* Visit the Hikvision website and navigate to the support section.
* Enter your device model number and search for the latest firmware version.
* Download the firmware file (.dav) to your computer.

Step 2: Configure the TFTP Server* Install the TFTP client software on your computer.
* Configure the TFTP server to listen on port 69.
* Add the firmware file (.dav) to the TFTP server's directory.

Step 3: Connect the Device to the TFTP Server* Connect the surveillance device to your network with an Ethernet cable.
* Configure the device's IP address to have the same subnet as the TFTP server. For example, if the TFTP server's IP address is 192.168.1.100, set the device's IP address to 192.168.1.x (where x is a number between 1 and 254).

Step 4: Access the Device's Web Interface* Open a web browser and enter the IP address of the surveillance device in the address bar.
* Log in to the device's web interface using the default username and password (admin/12345).

Step 5: Enable TFTP Boot* Navigate to Config > System > Network > Advanced Settings.
* Enable the "Enable TFTP Boot" option.
* Enter the IP address of the TFTP server.
* Click "Save" to apply the changes.

Step 6: Initiate the Firmware Update* Reboot the surveillance device.
* The device will start loading the firmware file from the TFTP server.
* The firmware update process may take several minutes.

Step 7: Verify the Firmware Update* Once the firmware update is complete, reboot the surveillance device.
* Log in to the device's web interface and navigate to Config > System > Information.
* Verify that the firmware version has been updated to the new version.

Troubleshooting:* If the firmware update fails, check the following:
* Ensure that the device is connected to the TFTP server correctly.
* Ensure that the firmware file (.dav) is valid and has been added to the TFTP server's directory.
* Check that the TFTP server is configured correctly and is listening on port 69.
* Try updating the firmware using a different TFTP client software.

Conclusion:Flashing firmware on Hikvision surveillance devices is a straightforward process that can improve the performance, stability, and security of your system. By following the steps outlined in this article, you can easily update the firmware on your Hikvision devices and keep them running optimally.

2024-12-17

Previous：Hikvision Security Camera Control Room: A Comprehensive Guide

Next：Hikvision Surveillance: Uncovering the Truth Behind the Absence of Recordings