Hikvision Monitoring Polling Shutdown185

Introduction

Hikvision is a leading provider of video surveillance products and solutions. Its cameras and recorders are widely used in a variety of applications, from residential to commercial to industrial. One of the features of Hikvision devices is the ability to be polled by a monitoring system. This allows the monitoring system to periodically check the status of the devices and receive alerts if there is a problem.

However, in certain situations, it may be necessary to disable polling for Hikvision devices. This could be due to performance issues, security concerns, or other reasons. This article will provide instructions on how to disable polling for Hikvision devices.

Prerequisites

Before you begin, you will need the following:* A computer with Internet access
* The IP address of the Hikvision device
* The username and password for the Hikvision device

Instructions

To disable polling for Hikvision devices, follow these steps:1. Open a web browser and enter the IP address of the Hikvision device.
2. Enter the username and password for the device.
3. Click on the "Configuration" tab.
4. Click on the "Network" tab.
5. Scroll down to the "Polling" section.
6. Uncheck the "Enable" checkbox.
7. Click on the "Save" button.

Troubleshooting

If you are having trouble disabling polling for Hikvision devices, try the following:* Make sure that you are using the correct IP address, username, and password for the device.
* Make sure that the device is connected to the network.
* Try restarting the device.
* Contact Hikvision technical support.

Conclusion

Disabling polling for Hikvision devices is a relatively simple process. By following the steps outlined in this article, you can easily disable polling for your Hikvision devices.

2024-12-11

Previous：Elevator Surveillance Recommendations

Next：Hikvision Web Player: Comprehensive Video Monitoring from Anywhere