Hikvision Surveillance Camera PPPoE Configuration279

Power over Ethernet (PoE) is a technology that allows network cables to carry electrical power, in addition to data. This eliminates the need for separate power cables, simplifying installation and reducing cable clutter. PoE is often used with security cameras, as it allows them to be placed in locations where it would be difficult or impossible to run separate power cables.

PPPoE (Point-to-Point Protocol over Ethernet) is a protocol that is used to establish a PPP connection over an Ethernet network. PPP is a widely used protocol for connecting to the Internet, and PPPoE allows it to be used over Ethernet networks. This is useful in situations where the Internet connection is provided by an Ethernet cable, such as in a home or small business.

To configure PPPoE on a Hikvision surveillance camera, you will need to access the camera's web interface. The IP address of the camera can be found on the camera's label or in the DHCP server's lease list. Once you have the IP address, you can open a web browser and enter it into the address bar. This will open the camera's web interface.

Once you are in the camera's web interface, navigate to the "Network" tab. In the "Network" tab, you will find the "PPPoE" settings. Enter the following information into the PPPoE settings:
Username: The username for your PPPoE connection.
Password: The password for your PPPoE connection.
Service Name: The service name for your PPPoE connection.

Once you have entered the PPPoE settings, click the "Apply" button. The camera will now attempt to establish a PPPoE connection. If the connection is successful, the camera will be able to access the Internet.

Here are some additional tips for configuring PPPoE on a Hikvision surveillance camera:
Make sure that the PPPoE settings are correct. If the settings are incorrect, the camera will not be able to establish a PPPoE connection.
If you are having trouble establishing a PPPoE connection, try restarting the camera.
If you are still having trouble, you can contact Hikvision technical support for assistance.

2024-12-10

Previous：Hikvision Surveillance Camera Error 302: Causes and Solutions

Next：Video Surveillance Recommendation for Nantong